SM-J530L 1 country Android 9 (Pie)

Samsung Galaxy J5 J530LKLU4CSK3 Firmware

Name: Samsung Galaxy J5 (SM-J530L)
Brand: Samsung
Availability: InStock

Samsung Galaxy J5 J530LKLU4CSK3 is an Android 9 (Pie) firmware for South Korea (LUC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J530LKLU3CSH7: Android updated from Android 9 (Nougat) to Android 9 (Pie); bootloader binary raised from 3 to 4, so after installing it there is no way back to older builds. A newer build for SM-J530L is available: J530LKLU7CUD2.

9.1/10 (470)8,666 times

Android 9 (Pie)

OS Version

2019-11-08

First release

other regions until 2019-11-09

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5 use bootloader binary 7 (latest: J530LKLU7CUD2). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-J530L	LUC South Korea	J530LLUC4CSK3	J530LKLU4CSK1	2019-11-09	2019-11-13	2.641 GiB	SM-J530L_1_20210429101907_bch34n4t7x_fac.zip
SM-J530L	LUC South Korea	J530L4CSK3	J530LKLU4CSK3	2019-11-08	—	—	—

Device specifications

Display diagonal13.2 cm (5.2")
Display resolution1280 x 720 pixels
Display typeSAMOLED
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity3000 mAh
Weight160 g

Specifications of SM-J530, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash J530LKLU4CSK3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J530LKLU4CSK3 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J530LKLU4CSK3 is Android 9 (Pie) firmware for Samsung Galaxy J5, released for South Korea (LUC). Samsung built it on 2019-11-08.

No. A newer build for SM-J530L is available: J530LKLU7CUD2. Install it instead of J530LKLU4CSK3 unless you need this exact version. The previous build was J530LKLU3CSH7.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.641 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J5 must be on bootloader binary 4 or lower.

This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy J5 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.