SM-J600L 1 country Android 10

Samsung Galaxy J6 J600LKLU4CTD5 Firmware

Name: Samsung Galaxy J6 (SM-J600L)
Brand: Samsung
Availability: InStock

Samsung Galaxy J6 J600LKLU4CTD5 is an Android 10 firmware for South Korea (LUC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J600LKLU4BTA1 https://samfirm.shop/build/J600LKLU4BTA1: Android updated from Android 9 to Android 10. A newer build for SM-J600L is available: J600LKLS5CUL1 https://samfirm.shop/build/J600LKLS5CUL1.

9.3/10 (454)8,542 times

Android 10

OS Version

2020-04-29

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J6 use bootloader binary 5 (latest: J600LKLS5CUL1). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: J600LKLU4CTD5

Model	Region	CSC Version	Release date	Size	File name	Download
SM-J600L	LUC South Korea	J600L4CTD5	—	—	—
SM-J600L	LUC South Korea	J600LLUC4CTD5	2020-05-20	3.285 GiB	SM-J600L_2_20211207174601_b1t6ro2hsu_fac.zip

Device specifications

Launched withAndroid 8.0
Display diagonal14.2 cm (5.6")
Display resolution1480 x 720 pixels
Display typeSAMOLED
RAM3 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity3000 mAh
Weight154 g

Specifications of SM-J600F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash J600LKLU4CTD5

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J600LKLU4CTD5 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J600LKLU4CTD5 is Android 10 firmware for Samsung Galaxy J6, released for South Korea (LUC). Samsung built it on 2020-04-29.

No. A newer build for SM-J600L is available: J600LKLS5CUL1. Install it instead of J600LKLU4CTD5 unless you need this exact version. The previous build was J600LKLU4BTA1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.285 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J6 must be on bootloader binary 4 or lower.

This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy J6 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.