Samsung Galaxy J7 Neo J701MTVJS8CTA1
SM-J701MT 4 countries Android 9

Samsung Galaxy J7 Neo J701MTVJS8CTA1 Firmware

Samsung Galaxy J7 Neo J701MTVJS8CTA1 is an Android 9 firmware for 4 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J701MTVJS7CSG1: Android updated from Android 9 (Pie) to Android 9; bootloader binary raised from 7 to 8, so after installing it there is no way back to older builds. A newer build for SM-J701MT is available: J701MTVJUBCUF2.

8.9/10 (34)26,467 times
Android 9
OS Version
2020-01-27
First release
other regions until 2020-02-28
n/a
Security patch
4
Countries
5
CSC codes
8
Bootloader binary

Bootloader binary 8. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J7 Neo use bootloader binary B (11) (latest: J701MTVJUBCUF2). If your device already runs binary B (11), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: J701MTVJS8CTA1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J701MT
    ICE Costa Rica
    		J701MTUWE8CTA1 2020-02-07 2020-02-13 2.336 GiB
    SM-J701MT_1_20210723085437_85qq1b0o2r_fac.zip
    SM-J701MT
    PEO Peru
    TPA Panama
    		J701MTUUB8CTA1 2020-02-07 2020-02-13 2.258 GiB
    SM-J701MT_1_20210612035138_fbtnv6zdgr_fac.zip
    SM-J701MT
    PNT Peru
    		J701MTPNT8CTA1 2020-02-28 2020-03-02 2.221 GiB
    SM-J701MT_1_20200228211615_048qrkdx9h_fac.zip
    SM-J701MT
    PNT Peru
    		J701MT8CTA1 2020-01-27 — — —
    SM-J701MT
    ZTO Brazil
    		J701MTZTO8CTA1 2020-02-07 2020-02-13 2.261 GiB
    SM-J701MT_1_20210703081300_mloqqipi02_fac.zip
    SM-J701MT
    ZTO Brazil
    		J701MT8CTA1 2020-01-27 — — —

    No matching downloads

    How to flash J701MTVJS8CTA1

    • J701MTVJS8CTA1 has bootloader binary 8. Your device must run binary 8 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J701MTVJS8CTA1 by region

    First release
    February 13, 2020
    Last region
    March 2, 2020
    Duration
    19 days
    Regions
    5
    1. Day 1 · · 4 regions
      BrazilZTOCosta RicaICEPanamaTPAPeruPEO
    2. Day 19 · · 1 region
      PeruPNT

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal14 cm (5.5")
    • Display resolution720 x 1280 pixels
    • Display typeSAMOLED
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight170 g

    Specifications of SM-J701M, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J701MTVJS8CTA1 is Android 9 firmware for Samsung Galaxy J7 Neo, released for 4 countries, 5 CSC codes. Samsung built it on 2020-01-27.

    No. A newer build for SM-J701MT is available: J701MTVJUBCUF2. Install it instead of J701MTVJS8CTA1 unless you need this exact version. The previous build was J701MTVJS7CSG1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Neo must be on bootloader binary 8 or lower.

    This build uses bootloader binary 8. It can be flashed on a Samsung Galaxy J7 Neo running binary 8 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 8.

    Other builds and changelog for Samsung Galaxy J7 Neo

    No changelog details available.
    Upgraded One UI for Android Pie 9.0

    One UI brings you Android Pie 9.0, with exciting new features and a whole new look and feel based on feedback from users in Samsung and Google.
    We recommend that you back up your important data to keep it safe before the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Health, Samsung Notes, and Samsung Members, need to be updated individually after you update your OS.
    To use the Remote unlock function in Find My Mobile on an Android Pie 9....

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 7 older builds
    No changelog details available.
    Model firmware by region