SM-J727U 1 country Android 8.1.0 (Oreo)

Samsung Galaxy J7 J727UUES5BSC2 Firmware

Name: Samsung Galaxy J7 (SM-J727U)
Brand: Samsung
Availability: InStock

Samsung Galaxy J7 J727UUES5BSC2 is an Android 8.1.0 (Oreo) firmware for United States (XAA, XAR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J727UUES4BRL1 https://samfirm.shop/build/J727UUES4BRL1: bootloader binary raised from 4 to 5, so after installing it there is no way back to older builds. A newer build for SM-J727U is available: J727UUES9BTK1 https://samfirm.shop/build/J727UUES9BTK1.

8.8/10 (471)8,665 times

Android 8.1.0 (Oreo)

OS Version

2019-03-18

First release

other regions until 2019-03-25

2019-03-01

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J7 use bootloader binary 9 (latest: J727UUES9BTK1). If your device already runs binary 9, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: J727UUES5BSC2

Model	Region	CSC Version	Release date	Size	File name	Download
SM-J727U	XAA, XAR United States	J727UOYM5BSC2	2019-04-08	1.838 GiB	SM-J727U_1_20201124161633_eg2thwnxhx_fac.zip

Device specifications

Display diagonal14 cm (5.5")
Display resolution1280 x 720 pixels
Processor frequency1.6 GHz
Rear camera resolution8 MP
Rear camera typeSingle camera
Battery capacity3300 mAh
Weight169.8 g

What's new in J727UUES5BSC2

· The security of your device has been improved.

How to flash J727UUES5BSC2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J727UUES5BSC2 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J727UUES5BSC2 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy J7, released for United States (XAA, XAR). It includes the 2019-03-01 security patch. Samsung built it on 2019-03-18.

No. A newer build for SM-J727U is available: J727UUES9BTK1. Install it instead of J727UUES5BSC2 unless you need this exact version. The previous build was J727UUES4BRL1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.838 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J7 must be on bootloader binary 5 or lower.

This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy J7 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 5.