Samsung Galaxy M10 M105GDXU5BTC1
SM-M105G 3 countries Android 9 (Pie)

Samsung Galaxy M10 M105GDXU5BTC1 Firmware

Samsung Galaxy M10 M105GDXU5BTC1 is an Android 9 (Pie) firmware for Indonesia (XID), Malaysia (XME), Vietnam (XEV, XXV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M105GDXS4BTB2: bootloader binary raised from 4 to 5, so after installing it there is no way back to older builds; security patch 2020-04-01 instead of 2020-02-01. A newer build for SM-M105G is available: M105GDXSACWA1.

9.4/10 (479)17,215 times
Android 9 (Pie)
OS Version
2020-04-09
Build Date
2020-04-01
Security patch
3
Countries
4
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy M10 use bootloader binary A (10) (latest: M105GDXSACWA1). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: M105GDXU5BTC1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-M105G
    XEV, XXV Vietnam
    XME Malaysia
    		M105GOLM5BTC1 2020-04-23 2.248 GiB
    SM-M105G_1_20200706191904_evca1o349l_fac.zip
    SM-M105G
    XID Indonesia
    		M105GOLE5BTC1 2020-05-11 2.128 GiB
    SM-M105G_1_20200706192234_k0k173u66c_fac.zip

    No matching downloads

    How to flash M105GDXU5BTC1

    • M105GDXU5BTC1 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in M105GDXU5BTC1

    · The security of your device has been improved.

    Rollout of M105GDXU5BTC1 by region

    First release
    April 23, 2020
    Last region
    May 11, 2020
    Duration
    19 days
    Regions
    4
    1. Day 1 · · 3 regions
      MalaysiaXMEVietnamXEVXXV
    2. Day 19 · · 1 region
      IndonesiaXID

    Device specifications

    • Display diagonal15.8 cm (6.2")
    • Display resolution720 x 1520 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeDual camera
    • Battery capacity3400 mAh
    • Weight163 g

    Specifications of SM-M105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    M105GDXU5BTC1 is Android 9 (Pie) firmware for Samsung Galaxy M10, released for Indonesia (XID), Malaysia (XME), Vietnam (XEV, XXV). It includes the 2020-04-01 security patch. Samsung built it on 2020-04-09.

    No. A newer build for SM-M105G is available: M105GDXSACWA1. Install it instead of M105GDXU5BTC1 unless you need this exact version. The previous build was M105GDXS4BTB2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy M10 must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy M10 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy M10

    • The security of your device has been improved.

    • An emergency alert (Emergency Cell Broadcast) feature has been added in Ukraine.

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    Show 2 older builds
    · Security patch update

    • The security of your device has been improved.

    Model firmware by region