Samsung Galaxy M10 M105GPUU1ASBD Firmware
Samsung Galaxy M10 M105GPUU1ASBD is an Android 8.1.0 firmware for Russia (SER). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M105GDXU1ASBC: Android updated from Android 8.1.0 (Oreo) to Android 8.1.0. A newer build for SM-M105G is available: M105GDXSACWA1.
9.0/10 (453)4,468 times
Android 8.1.0
OS Version
2019-02-28
Build Date
n/a
Security patch
1
Countries
1
CSC codes
1
Bootloader binary
Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
Newer builds of Samsung Galaxy M10 use bootloader binary A (10) (latest: M105GDXSACWA1). If your device already runs binary A (10), this build cannot be flashed.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
MODEM/CP Version: M105GPUU1ASBD
Device specifications
- Display diagonal15.8 cm (6.2")
- Display resolution720 x 1520 pixels
- Display typeTFT
- RAM2 GB
- Rear camera resolution13 MP
- Rear camera typeDual camera
- Battery capacity3400 mAh
- Weight163 g
Specifications of SM-M105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.
How to flash M105GPUU1ASBD
- Install Samsung USB Drivers:Download Official Drivers
- Download Odin Flash Tool:
- M105GPUU1ASBD has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Frequently Asked Questions
M105GPUU1ASBD is Android 8.1.0 firmware for Samsung Galaxy M10, released for Russia (SER). Samsung built it on 2019-02-28.
No. A newer build for SM-M105G is available: M105GDXSACWA1. Install it instead of M105GPUU1ASBD unless you need this exact version. The previous build was M105GDXU1ASBC.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy M10 must be on bootloader binary 1 or lower.
This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy M10 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.