SM-M105G 1 country Android 9 (Pie)

Samsung Galaxy M10 M105GPUU1BSF2 Firmware

Name: Samsung Galaxy M10 (SM-M105G)
Brand: Samsung
Availability: InStock

Samsung Galaxy M10 M105GPUU1BSF2 is an Android 9 (Pie) firmware for Russia (SER). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M105GPUU1BSF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-M105G is available: M105GDXSACWA1.

9.4/10 (36)4,604 times

Android 9 (Pie)

OS Version

2019-06-21

First release

other regions until 2019-06-26

2019-05-01

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy M10 use bootloader binary A (10) (latest: M105GDXSACWA1). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-M105G	SER Russia	M105GSER1BSF2	M105GXXU1BSEA	2019-06-26	2019-07-10	2.2 GiB	SM-M105G_1_20190626062227_x508p2oosc_fac.zip
SM-M105G	SER Russia	M105G1BSF2	M105GPUU1BSF2	2019-06-21	2019-07-10	—	—

Device specifications

Display diagonal15.8 cm (6.2")
Display resolution720 x 1520 pixels
Display typeTFT
RAM2 GB
Rear camera resolution13 MP
Rear camera typeDual camera
Battery capacity3400 mAh
Weight163 g

Specifications of SM-M105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

What's new in M105GPUU1BSF2

- Improved and/or new features of the software and third-party applications

How to flash M105GPUU1BSF2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

M105GPUU1BSF2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

M105GPUU1BSF2 is Android 9 (Pie) firmware for Samsung Galaxy M10, released for Russia (SER). It includes the 2019-05-01 security patch. Samsung built it on 2019-06-21.

No. A newer build for SM-M105G is available: M105GDXSACWA1. Install it instead of M105GPUU1BSF2 unless you need this exact version. The previous build was M105GPUU1BSF1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.2 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy M10 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy M10 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.