SM-M336K 1 country Android 14

Samsung Galaxy Jump2 M336KKSS8EXH2 Firmware

Name: Samsung Galaxy Jump2 (SM-M336K)
Brand: Samsung
Availability: InStock

Samsung Galaxy Jump2 M336KKSS8EXH2 is an Android 14 firmware for South Korea (KTC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build M336KKSU7EXE2 https://samfirm.shop/build/M336KKSU7EXE2: bootloader binary raised from 7 to 8, so after installing it there is no way back to older builds; security patch 2024-08-01 instead of 2024-05-01. A newer build for SM-M336K is available: M336KKSSEGZE1 https://samfirm.shop/build/M336KKSSEGZE1.

9.4/10 (408)2,618 times

Android 14

OS Version

2024-08-27

Build Date

2024-08-01

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 8. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Jump2 use bootloader binary E (14) (latest: M336KKSSEGZE1). If your device already runs binary E (14), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: M336KKSS8EXH2

Model	Region	CSC Version	Release date	Size	File name	Download
SM-M336K	KTC South Korea	M336KKTC8EXH2	2024-08-27	6.595 GiB	SM-M336K_3_20240807105641_jmxfxj72pt_fac.zip

Device specifications

Launched withAndroid 12
Display diagonal16.8 cm (6.6")
Display resolution1080 x 2408 pixels
RAM6 GB
Rear camera resolution50 MP
Rear camera typeQuad camera
Battery capacity5000 mAh
Weight198 g

Specifications of SM-M336B, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash M336KKSS8EXH2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

M336KKSS8EXH2 has bootloader binary 8. Your device must run binary 8 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

M336KKSS8EXH2 is Android 14 firmware for Samsung Galaxy Jump2, released for South Korea (KTC). It includes the 2024-08-01 security patch. Samsung built it on 2024-08-27.

No. A newer build for SM-M336K is available: M336KKSSEGZE1. Install it instead of M336KKSS8EXH2 unless you need this exact version. The previous build was M336KKSU7EXE2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 6.595 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Jump2 must be on bootloader binary 8 or lower.

This build uses bootloader binary 8. It can be flashed on a Samsung Galaxy Jump2 running binary 8 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 8.