GT-N7000 4 countries

Samsung Galaxy Note N7000DDLSC Firmware

Name: Samsung Galaxy Note (GT-N7000)
Brand: Samsung
Availability: InStock

Samsung Galaxy Note N7000DDLSC is an Android firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N7000BULP5 https://samfirm.shop/build/N7000BULP5: bootloader binary raised from B (11) to D (13), so after installing it there is no way back to older builds. A newer build for GT-N7000 is available: N7000ZSLR1 https://samfirm.shop/build/N7000ZSLR1.

9.1/10 (472)13,995 times

n/a

OS Version

2013-03-11

Build Date

n/a

Security patch

Countries

CSC codes

D (13)

Bootloader binary

Bootloader binary D (13). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Note use bootloader binary Z (35) (latest: N7000ZSLR1). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: N7000DDLS6

Model	Region	CSC Version	Build Date	Release date	Size	File name
GT-N7000	INU India	N7000ODDLSC	2013-03-11	2013-03-19	—	—
GT-N7000	NPL Nepal	N7000ODDLSC	2013-03-11	2013-03-19	766.972 MiB	GT-N7000_NPL_1_20130311111715_pbius41fr2.zip
GT-N7000	SLK Sri Lanka	N7000ODDLSC	2013-03-11	2013-03-19	766.972 MiB	GT-N7000_SLK_1_20130311112140_vrivxxvzn3.zip
GT-N7000	TML	N7000ODDLSC	2013-03-11	2013-03-19	766.972 MiB	GT-N7000_TML_1_20130311112720_qwenxo5umg.zip

How to flash N7000DDLSC

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

N7000DDLSC has bootloader binary D (13). Your device must run binary D (13) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

No. A newer build for GT-N7000 is available: N7000ZSLR1. Install it instead of N7000DDLSC unless you need this exact version. The previous build was N7000BULP5.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 766.972 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note must be on bootloader binary D (13) or lower.

This build uses bootloader binary D (13). It can be flashed on a Samsung Galaxy Note running binary D (13) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.