Samsung Galaxy Note5 N920GUBS4CRE5
SM-N920G 1 country Android 7.0 (Nougat)

Samsung Galaxy Note5 N920GUBS4CRE5 Firmware

Samsung Galaxy Note5 N920GUBS4CRE5 is an Android 7.0 (Nougat) firmware for Argentina (UFN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N920GUBS4CRE3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-N920G is available: N920GUBU5CVGN.

9.1/10 (455)8,487 times
Android 7.0 (Nougat)
OS Version
2018-05-10
Build Date
n/a
Security patch
1
Countries
1
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Note5 use bootloader binary 5 (latest: N920GUBU5CVGN). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionRelease dateSizeFile nameDownload
    SM-N920G
    UFN Argentina
    		N920G4CRA1N920GUBS4CRE5 — — —
    SM-N920G
    UFN Argentina
    		N920GUFN4CRA1N920GUBU4CRA4 2018-06-11 2.278 GiB
    SM-N920G_1_20221022161221_008q9726h3_fac.zip

    No matching downloads

    How to flash N920GUBS4CRE5

    • N920GUBS4CRE5 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.1.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight170.9476 g

    Specifications of SM-N920, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    N920GUBS4CRE5 is Android 7.0 (Nougat) firmware for Samsung Galaxy Note5, released for Argentina (UFN). Samsung built it on 2018-05-10.

    No. A newer build for SM-N920G is available: N920GUBU5CVGN. Install it instead of N920GUBS4CRE5 unless you need this exact version. The previous build was N920GUBS4CRE3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.278 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note5 must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy Note5 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 33 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note5

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.
    • Security
    The device is protected with improved security.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Model firmware by region