Samsung Galaxy Note5 N920IDVU4CRE1
SM-N920I 4 countries Android 7.0 (Nougat)

Samsung Galaxy Note5 N920IDVU4CRE1 Firmware

Samsung Galaxy Note5 N920IDVU4CRE1 is an Android 7.0 (Nougat) firmware for 4 countries, 8 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build N920IDVU4CRC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-N920I is available: N920IDVU5CVG3.

9.1/10 (452)69,323 times
Android 7.0 (Nougat)
OS Version
2018-05-04
Build Date
n/a
Security patch
4
Countries
8
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Note5 use bootloader binary 5 (latest: N920IDVU5CVG3). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: N920IDVU4CRE1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-N920I
    NZC New Zealand
    N920I4CRE1 — — —
    SM-N920I
    NZC New Zealand
    N920INZC4CRE1 2018-08-06 2.233 GiB
    SM-N920I_1_20220819164430_yitr9di0m8_fac.zip
    SM-N920I
    OPS Australia
    N920I4CRE1 — — —
    SM-N920I
    OPS Australia
    N920IOPS4CRE1 2018-06-22 2.204 GiB
    SM-N920I_1_20220819151920_0i4v50zb7v_fac.zip
    SM-N920I
    PNG Papua New Guinea
    N920I4CRE1 — — —
    SM-N920I
    PNG Papua New Guinea
    N920IPNG4CRE1 2018-08-06 2.234 GiB
    SM-N920I_1_20220819164420_6c6xzc5isa_fac.zip
    SM-N920I
    TNZ New Zealand
    N920I4CRE1 — — —
    SM-N920I
    TNZ New Zealand
    N920ITNZ4CRE1 2018-08-06 2.263 GiB
    SM-N920I_1_20220819164410_fz63doxboa_fac.zip
    SM-N920I
    VAU Australia
    N920I4CRE1 — — —
    SM-N920I
    VAU Australia
    N920IVAU4CRE1 2018-07-13 2.197 GiB
    SM-N920I_1_20220817201820_kkqske68sw_fac.zip
    SM-N920I
    VFJ Fiji
    N920I4CRE1 — — —
    SM-N920I
    VFJ Fiji
    N920IVFJ4CRE1 2018-08-06 2.209 GiB
    SM-N920I_1_20220819164350_az64gnhtxy_fac.zip
    SM-N920I
    VNZ New Zealand
    N920I4CRE1 — — —
    SM-N920I
    VNZ New Zealand
    N920IVNZ4CRE1 2018-08-06 2.221 GiB
    SM-N920I_1_20220819164330_8i39zvdgob_fac.zip
    SM-N920I
    XSA Australia
    N920I4CRE1 — — —
    SM-N920I
    XSA Australia
    N920IXSA4CRE1 2018-06-27 2.195 GiB
    SM-N920I_1_20220817201250_1w2lyd5sko_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 5.1.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • Battery capacity3000 mAh
    • Weight170.9476 g

    Specifications of SM-N920, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    How to flash N920IDVU4CRE1

    • N920IDVU4CRE1 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    N920IDVU4CRE1 is Android 7.0 (Nougat) firmware for Samsung Galaxy Note5, released for 4 countries, 8 CSC codes. Samsung built it on 2018-05-04.

    No. A newer build for SM-N920I is available: N920IDVU5CVG3. Install it instead of N920IDVU4CRE1 unless you need this exact version. The previous build was N920IDVU4CRC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Note5 must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy Note5 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Note5

    • GPS
    The stability has been improved.
    • Security
    The device is protected with improved security.

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.
    • Security
    The device is protected with improved security.

    No changelog details available.
    No changelog details available.
    Show 15 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.