Samsung Galaxy Tab A 8.0 P355YZSU1API1
SM-P355Y 2 countries Android 5.0.2 (Lollipop)

Samsung Galaxy Tab A 8.0 P355YZSU1API1 Firmware

Samsung Galaxy Tab A 8.0 P355YZSU1API1 is an Android 5.0.2 (Lollipop) firmware for Hong Kong SAR China (TGY), Taiwan (BRI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P355YZSU1APH2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-P355Y is available: P355YZSS1BRI1.

9.2/10 (455)8,625 times
Android 5.0.2 (Lollipop)
OS Version
2016-09-18
Build Date
n/a
Security patch
2
Countries
2
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: P355YZSU1API1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-P355Y
    BRI Taiwan
    TGY Hong Kong SAR China
    		P355YOZS1API1 2016-10-28 1.775 GiB
    SM-P355Y_1_20181023091701_52xtq0dw6o_fac.zip

    No matching downloads

    How to flash P355YZSU1API1

    • P355YZSU1API1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in P355YZSU1API1

    ㆍThe latest Android security patch has been applied.
    - Device security has been further enhanced.

    Rollout of P355YZSU1API1 by region

    Samsung released this build in all regions (2) on the same day, October 28, 2016.

    Device specifications

    • Display diagonal20.3 cm (8")
    • Display resolution1024 x 768 pixels
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 4 (802.11n)
    • Weight338 g

    Specifications of SM-P355, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    P355YZSU1API1 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy Tab A 8.0, released for Hong Kong SAR China (TGY), Taiwan (BRI). Samsung built it on 2016-09-18.

    No. A newer build for SM-P355Y is available: P355YZSS1BRI1. Install it instead of P355YZSU1API1 unless you need this exact version. The previous build was P355YZSU1APH2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.775 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 8.0 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab A 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 7 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A 8.0

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    · OS upgrade - Android 6.0 Marshmallow
    · The new TouchWiz provides enhanced usability and an updated visual design.
    · Quick connect helps you easily find and connect to nearby devices by showing currently connected devices and previous connections.
    · Settings for the following have been reset: Theme, Email, Icon/Widget
    ※ Android 6.0 Marshmallow does not support the Decrypt device function. If your mobile device is encrypted, encryption cannot be disabled after upgrading. If you want encryption t...

    ㆍThe latest Android security patch has been applied.
    - Device security has been further enhanced.

    ㆍAdded new feature
    - PWS(public warning system) has been enabled.
    ㆍThe latest Android security patch has been applied.
    - Device security has been further enhanced.

    - upgrade the Smart Manager
    - Improved the FOTA speed
    - apply the Andriod regular security patch
    - Performance improvement by efficient system management

    Show 1 older build

    - Device stability improvements, bug fixes.
    - New and / or enhanced features.
    - Further improvements to performance.

    Model firmware by region