SM-P615N 1 country Android 12

Samsung Galaxy Tab S6 Lite P615NKOU4EVC5 Firmware

Name: Samsung Galaxy Tab S6 Lite (SM-P615N)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab S6 Lite P615NKOU4EVC5 is an Android 12 firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P615NKOS4DUL5 https://samfirm.shop/build/P615NKOS4DUL5: Android updated from Android 11 to Android 12. A newer build for SM-P615N is available: P615NKOSAFYD1 https://samfirm.shop/build/P615NKOSAFYD1.

8.8/10 (456)8,623 times

Android 12

OS Version

2022-03-24

First release

other regions until 2022-04-12

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab S6 Lite use bootloader binary A (10) (latest: P615NKOSAFYD1). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: P615NKOU4EVC5

Model	Region	CSC Version	Build Date	Release date	Size	File name	Download
SM-P615N	KOO South Korea	P615NKOO4EVD1	2022-04-12	2022-04-12	4.17 GiB	SM-P615N_3_20220408082340_nejh4qj8s6_fac.zip
SM-P615N	KOO South Korea	P615NKOO4EVC5	2022-03-24	2022-03-24	4.17 GiB	SM-P615N_2_20220312081211_362rw9i0n7_fac.zip

Device specifications

Launched withAndroid 10
Display diagonal26.4 cm (10.4")
Display resolution2000 x 1200 pixels
Processor frequency2.3 GHz
Processor familySamsung Exynos
Processor model9611
Rear camera resolution8 MP
Front camera resolution5 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight467 g

How to flash P615NKOU4EVC5

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

P615NKOU4EVC5 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

P615NKOU4EVC5 is Android 12 firmware for Samsung Galaxy Tab S6 Lite, released for South Korea (KOO). Samsung built it on 2022-03-24.

No. A newer build for SM-P615N is available: P615NKOSAFYD1. Install it instead of P615NKOU4EVC5 unless you need this exact version. The previous build was P615NKOS4DUL5.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab S6 Lite must be on bootloader binary 4 or lower.

This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy Tab S6 Lite running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 17 other builds of this model use the same binary, so you can switch between them in both directions.