SM-P905F0 1 country Android 5.0.2 (Lollipop)

Samsung Galaxy Note Pro 12.2 P905F0UBQC3 Firmware

Name: Samsung Galaxy Note Pro 12.2 (SM-P905F0)
Brand: Samsung
Availability: InStock

Samsung Galaxy Note Pro 12.2 P905F0UBQC3 is an Android 5.0.2 (Lollipop) firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build P905F0UBPK4 https://samfirm.shop/build/P905F0UBPK4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-P905F0.

9.2/10 (471)8,614 times

Android 5.0.2 (Lollipop)

OS Version

2017-03-30

First release

other regions until 2017-04-11

n/a

Security patch

Countries

CSC codes

U (30)

Bootloader binary

Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-P905F0	KOO South Korea	P905F0KOOBQC3	P905F0UBODA	2017-04-11	2017-04-11	1.481 GiB	SM-P905F0_1_20170411123113_gqhc0wa9pe_fac.zip
SM-P905F0	KOO South Korea	P905F0BQC3	P905F0UBQC3	2017-03-30	—	—	—

Device specifications

Launched withAndroid
Display diagonal31 cm (12.2")
Display resolution2560 x 1600 pixels
Display technologyLCD
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution2 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight753 g

Specifications of SM-P905, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash P905F0UBQC3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

P905F0UBQC3 has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

P905F0UBQC3 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy Note Pro 12.2, released for South Korea (KOO). Samsung built it on 2017-03-30.

Yes. P905F0UBQC3 is the newest build for SM-P905F0 on SamFirm. The previous build was P905F0UBPK4.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.481 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Note Pro 12.2 must be on bootloader binary U (30) or lower.

This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Note Pro 12.2 running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.