Samsung Galaxy Watch4 R860XXU1GVH2
SM-R860 17 countries Wear OS 11

Samsung Galaxy Watch4 R860XXU1GVH2 Firmware

Samsung Galaxy Watch4 R860XXU1GVH2 is an Wear OS 11 firmware for 17 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build R860XXU1FVC8: security patch 2022-08-01 instead of 2022-03-01. A newer build for SM-R860 is available: R860TBS2JZG3.

8.8/10 (28)5,774 times
Wear OS 11
OS Version
2022-09-02
First release
other regions until 2022-09-06
2022-08-01
Security patch
17
Countries
17
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Watch4 use bootloader binary 2 (latest: R860TBS2JZG3). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: R860XXU1GVH2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-R860
    ACR Saudi Arabia
    AFR Kenya
    ARO Argentina
    ATO Austria
    +13 more countries
    AUT Switzerland
    BGL Bulgaria
    BNG Bangladesh
    BRI Taiwan
    BTU United Kingdom
    BVO Bolivia
    KOO South Korea
    XEF France
    XJP Japan
    XME Malaysia
    XSE Indonesia
    XSK Slovakia
    ZTO Brazil
    		R860OXM1GVH2 2022-09-02 2022-09-05 2.657 GiB
    SM-R860_1_20220902165011_5vbnj40juw_fac.zip
    SM-R860
    BRI Taiwan
    KOO South Korea
    XEF France
    XJP Japan
    +1 more country
    XSE Indonesia
    		R860OMK1GVH2 2022-09-06 2022-09-05 2.586 GiB
    SM-R860_20_20220906165921_yd3u7stj33_fac.zip

    No matching downloads

    Device specifications

    • Launched withWear OS
    • Display diagonal3.05 cm (1.2")
    • Display technologyOLED
    • Display resolution396 x 396 pixels
    • Processor frequency1.8 MHz
    • RAM1500 MB
    • Flash memory16 GB
    • Battery capacity247 mAh
    • Weight25.9 g
    • Band materialSilicone
    • Band colourBlack

    What's new in R860XXU1GVH2

    • Watch Face
    Enjoy new and improved watch faces with enriched style and customizable options.
    - 6 new watch faces
      (Pebbles, Flower garden, Info Board, Pro analog, Kinetic digits, Gradient number)
    - More customizable options added for existing watch faces
      (Dial, Indexes, Character, Color, Complication, Clock type)
    - New complications have been added.
    • Watch home screen
    - Add watch faces as your favorite, make finding and changing watch face easier.
    - Explore watch face list to add watch face as your favorite including new watch faces.
    • Camera Controller
    A feature that allows you to switch between photo and video shooting will be added.
    ※ Only Samsung flagship models after Galaxy S9 and Note9 with OneUI 4.1.1 or later are supported.
    • Input characters
    - You can input characters using the QWERTY keyboard and gestures. (Some languages are not supported)
    - You can switch between different input mode (keyboard, voice input, and handwriting) during text entry
    • Notifications
    GIF animation playback of Samsung message notifications is supported.
    • Phone, Contacts
    When Watch is connected to dual SIM phone,
    - The SIM icon used on the phone is displayed the same on the watch.
    - If there is no preferred SIM set on the phone, it can select the SIM to make a call on the watch.
    - It supports to make calls through other SIMs on the watch even if there is a preferred SIM set on the phone.
    • Messages
    - The input field is provided in the message threads.
    - Through the input field, the recently used input mode is supported.
    - Draft messages are kept in the input field.
    • Alarm
    “Date, alarm name, snooze” settings features are added.
    • Voice recordings
    Files recorded on the Watch are quickly saved to the connected phone.
    • Settings
    - Larger sizes for font size settings are supported.
    • Accessibility
    - Additional auxiliary features for “improving visibility” are supported.
    - A “Left and right sound balance” control feature for “hearing aids” was added.
    - A “Touch and hold delay” settings feature to aid “Interaction and dexterity” was added.
    • Bixby
    The “Quick commands” feature, which groups together and runs multiple actions in one command, is supported.

    How to flash R860XXU1GVH2

    • R860XXU1GVH2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    R860XXU1GVH2 is Wear OS 11 firmware for Samsung Galaxy Watch4, released for 17 countries, 17 CSC codes. It includes the 2022-08-01 security patch. Samsung built it on 2022-09-02.

    No. A newer build for SM-R860 is available: R860TBS2JZG3. Install it instead of R860XXU1GVH2 unless you need this exact version. The previous build was R860XXU1FVC8.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Watch4 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Watch4 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Watch4

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 15 older builds

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    One UI 8 Watch Upgrade
    Get things done

    Stay on top of important tasks with the Now bar
    Check the information you need right now and start essential features straight from your watch face. Ongoing tasks will appear in the Now bar at the bottom of your watch face so you can check key information quickly.

    Do more with double pinch
    Just pinch your thumb and index finger together twice to scroll through notifications, control music, take pictures, and more. You can also customize what happens wh...

    One UI 8 Watch Upgrade
    Get things done

    Stay on top of important tasks with the Now bar
    Check the information you need right now and start essential features straight from your watch face. Ongoing tasks will appear in the Now bar at the bottom of your watch face so you can check key information quickly.

    Do more with double pinch
    Just pinch your thumb and index finger together twice to scroll through notifications, control music, take pictures, and more. You can also customize what happens wh...

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Model firmware by region