GT-S5280 4 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy STAR S5280XXAMF1 Firmware

Name: Samsung Galaxy STAR (GT-S5280)
Brand: Samsung
Availability: InStock

Samsung Galaxy STAR S5280XXAMF1 is an Android 4.1.2 (Jelly Bean) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for GT-S5280 is available: S5280XXANG2 https://samfirm.shop/build/S5280XXANG2.

8.9/10 (488)17,696 times

Android 4.1.2 (Jelly Bean)

OS Version

2013-06-07

First release

other regions until 2013-06-10

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: S5280XXAMF1

Model	Region	CSC Version	Build Date	Size	File name
GT-S5280	MOC	S5280MOCAMF1	2013-06-07	—	—
GT-S5280	TMN Portugal	S5280TMNAME3	2013-06-10	481.975 MiB	GT-S5280_TMN_1_20140723190340_3umirs5u3u_fac.zip
GT-S5280	WTL Saudi Arabia	S5280OJVAMF1	2013-06-07	—	—
GT-S5280	XSG United Arab Emirates	S5280OJVAME2	2013-06-07	535.294 MiB	GT-S5280_1_20150918152926_8pqsv3gx2t_fac.zip

Device specifications

Launched withAndroid 4.1.2
Display diagonal7.62 cm (3")
Display resolution320 x 240 pixels
Display typeTFT
Processor frequency1 GHz
Processor modelA5
RAM0.5 GB
Rear camera resolution2 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity1200 mAh
Weight102.5 g

How to flash S5280XXAMF1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

S5280XXAMF1 has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

S5280XXAMF1 is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy STAR, released for 4 countries, 4 CSC codes. Samsung built it on 2013-06-07.

No. A newer build for GT-S5280 is available: S5280XXANG2. Install it instead of S5280XXAMF1 unless you need this exact version.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy STAR must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy STAR running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 7 other builds of this model use the same binary, so you can switch between them in both directions.