GT-S5660 5 countries Android 2.3.6 (Gingerbread)

Samsung Galaxy GIO S5660JPKT7 Firmware

Name: Samsung Galaxy GIO (GT-S5660)
Brand: Samsung
Availability: InStock

Samsung Galaxy GIO S5660JPKT7 is an Android 2.3.6 (Gingerbread) firmware for 5 countries, 5 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S5660DXKT8: Android updated from Android 2.3 (Gingerbread) to Android 2.3.6 (Gingerbread); bootloader binary raised from D (13) to J (19), so after installing it there is no way back to older builds. A newer build for GT-S5660 is available: S5660ZSLT5.

8.7/10 (478)15,971 times

Android 2.3.6 (Gingerbread)

OS Version

2012-03-22

First release

other regions until 2012-05-22

n/a

Security patch

Countries

CSC codes

J (19)

Bootloader binary

Bootloader binary J (19). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy GIO use bootloader binary Z (35) (latest: S5660ZSLT5). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: S5660XXKT6

Model	Region	CSC Version	Build Date	Release date	Size	File name
GT-S5660	AFG Afghanistan	S5660OJPKT5	2012-03-28	2012-04-13	134.438 MiB	GT-S5660_AFG_1_20120328102002_twr4ov7rm8.zip
GT-S5660	MID Iraq	S5660OJPKT5	2012-03-26	2012-04-05	134.438 MiB	GT-S5660_MID_1_20120326151238_e03b7knqnd.zip
GT-S5660	PAK Pakistan	S5660OJPKT5	2012-03-22	2012-03-28	134.438 MiB	GT-S5660_PAK_1_20120322161140_xx6mjqcaqb.zip
GT-S5660	THR Iran	S5660OJPKT5	2012-04-12	2012-04-23	134.438 MiB	GT-S5660_THR_1_20120412174306_6mgvli0xdw.zip
GT-S5660	XSG United Arab Emirates	S5660OJPKT5	2012-05-22	2012-05-25	134.438 MiB	GT-S5660_XSG_1_20120522175234_rdd142n8kt.zip

Device specifications

Launched withAndroid 2.2
Display diagonal8.13 cm (3.2")
Display resolution320 x 480 pixels
Display typeTFT
Processor frequency0.8 GHz
Rear camera resolution3.15 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity1350 mAh
Weight102 g

How to flash S5660JPKT7

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

S5660JPKT7 has bootloader binary J (19). Your device must run binary J (19) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

S5660JPKT7 is Android 2.3.6 (Gingerbread) firmware for Samsung Galaxy GIO, released for 5 countries, 5 CSC codes. Samsung built it on 2012-03-22.

No. A newer build for GT-S5660 is available: S5660ZSLT5. Install it instead of S5660JPKT7 unless you need this exact version. The previous build was S5660DXKT8.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 134.438 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy GIO must be on bootloader binary J (19) or lower.

This build uses bootloader binary J (19). It can be flashed on a Samsung Galaxy GIO running binary J (19) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary J (19).