Samsung Galaxy S23 FE S7110ZCS6DYB3
SM-S7110 1 country Android 14

Samsung Galaxy S23 FE S7110ZCS6DYB3 Firmware

Samsung Galaxy S23 FE S7110ZCS6DYB3 is an Android 14 firmware for China (CHC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S7110ZHS6DYB3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-S7110 is available: S7110ZCS8GZI3.

OS updates guaranteed until: Android 17Security updates until: Oct 25, 2028
8.8/10 (316)1,918 times
Android 14
OS Version
2025-03-04
Build Date
2024-12-01
Security patch
1
Countries
1
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S23 FE use bootloader binary 8 (latest: S7110ZCS8GZI3). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: S7110ZCS6DYB3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-S7110
    CHC China
    		S7110CHC6DYB3 2025-03-04 10.435 GiB
    SM-S7110_2_20250219152210_8gj0klpwsn_fac.zip

    No matching downloads

    How to flash S7110ZCS6DYB3

    • S7110ZCS6DYB3 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in S7110ZCS6DYB3

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    Security patch: December 2024

    SMR Dec-2024 fixes 34 vulnerabilities, 2 of them critical. Android Security Bulletin: 26, Samsung Semiconductor: 2, Samsung-specific issues (SVE): 6.

    Most severe Samsung fixes:

    • critical Out-of-bound write in libsaped.so (CVE-2024-49415)
    • high Out-of-bounds write in libswmfextractor.so (CVE-2024-49410)
    • high Improper Verification of Cryptographic Signature in SmartSwitch (CVE-2024-49413)

    All fixes and Galaxy models with this patch

    Device specifications

    • Display diagonal16.3 cm (6.4")
    • Display resolution1080 x 2340 pixels
    • RAM8 GB
    • Rear camera resolution50 MP
    • Rear camera typeTriple camera
    • Battery capacity4500 mAh
    • Weight209 g

    Specifications of SM-S711B, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    S7110ZCS6DYB3 is Android 14 firmware for Samsung Galaxy S23 FE, released for China (CHC). It includes the 2024-12-01 security patch. Samsung built it on 2025-03-04.

    SMR Dec-2024 fixes 34 vulnerabilities, 2 of them critical. Android Security Bulletin: 26, Samsung Semiconductor: 2, Samsung-specific issues (SVE): 6.

    No. A newer build for SM-S7110 is available: S7110ZCS8GZI3. Install it instead of S7110ZCS6DYB3 unless you need this exact version. The previous build was S7110ZHS6DYB3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 10.435 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S23 FE must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy S23 FE running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 25 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S23 FE

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    One UI 8.5
    Visual design

    Fresh new look
    One UI seamlessly integrates into your daily routine by combining immersive visuals with meaningful personalization for a more refined and sophisticated design. Transparent blur effects add depth and make content easier to navigate, while floating elements react organically to your workflow for a more focused experience. Through familiar and intuitive data visualization, One UI delivers a design that feels both personal and relatable, helping you focus...

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Model firmware by region