SM-S916N 1 country Android 14

Samsung Galaxy S23+ S916NKSU5CXK4 Firmware

Name: Samsung Galaxy S23+ (SM-S916N)
Brand: Samsung
Availability: InStock

Samsung Galaxy S23+ S916NKSU5CXK4 is an Android 14 firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build S916NKSS4CXJ1: bootloader binary raised from 4 to 5, so after installing it there is no way back to older builds; security patch 2024-11-01 instead of 2024-10-01. A newer build for SM-S916N is available: S916NKSU8GZIF.

OS updates guaranteed until: Android 17Security updates until: Jan 23, 2028

8.9/10 (368)9,102 times

Android 14

OS Version

2024-11-21

Build Date

2024-11-01

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S23+ use bootloader binary 8 (latest: S916NKSU8GZIF). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: S916NKSU5CXK4

Model	Region	CSC Version	Release date	Size	File name	Download
SM-S916N	KOO, KTC, LUC, SKC South Korea	S916NOKR5CXK4	2024-11-21	9.347 GiB	SM-S916N_2_20241111140930_bh907k3xyp_fac.zip

Device specifications

Launched withAndroid 13
Display diagonal16.8 cm (6.6")
Display resolution2340 x 1080 pixels
RAM8 GB
Rear camera resolution50 MP
Rear camera typeTriple camera
Battery capacity4700 mAh
Weight195 g

Specifications of SM-S916B, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash S916NKSU5CXK4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

S916NKSU5CXK4 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

S916NKSU5CXK4 is Android 14 firmware for Samsung Galaxy S23+, released for South Korea (KOO, KTC, LUC, SKC). It includes the 2024-11-01 security patch. Samsung built it on 2024-11-21.

No. A newer build for SM-S916N is available: S916NKSU8GZIF. Install it instead of S916NKSU5CXK4 unless you need this exact version. The previous build was S916NKSS4CXJ1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 9.347 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S23+ must be on bootloader binary 5 or lower.

This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy S23+ running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.