SCV35 1 country

Samsung Galaxy S8+ SCV35KDU1AQL2 Firmware

Name: Samsung Galaxy S8+ (SCV35)
Brand: Samsung
Availability: InStock

Samsung Galaxy S8+ SCV35KDU1AQL2 is an Android firmware for Japan (KDI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. A newer build for SCV35 is available: SCV35KDU1CZE1 https://samfirm.shop/build/SCV35KDU1CZE1.

9.1/10 (33)4,733 times

n/a

OS Version

2017-12-04

First release

other regions until 2018-07-17

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: SCV35KDU1AQL2

Model	Region	CSC Version	Build Date	Release date	Size	File name	Download
SCV35	KDI Japan	SCV35KDI1AQL2	2018-07-17	2018-07-17	2.917 GiB	SCV35_1_20180717162827_b1mk0xceu0_fac.zip
SCV35	KDI Japan	KDU1AQL21AQL2	2017-12-04	—	—	—

How to flash SCV35KDU1AQL2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

SCV35KDU1AQL2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

No. A newer build for SCV35 is available: SCV35KDU1CZE1. Install it instead of SCV35KDU1AQL2 unless you need this exact version.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.917 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S8+ must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy S8+ running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.