Samsung Galaxy S9+ SCV39KDU1CTC2
SCV39 1 country Android 10

Samsung Galaxy S9+ SCV39KDU1CTC2 Firmware

Samsung Galaxy S9+ SCV39KDU1CTC2 is an Android 10 firmware for Japan (KDI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build SCV39KDU1CTB3: Android updated from Android 10 (Pie) to Android 10. A newer build for SCV39 is available: SCV39KDS1CVK1.

9.2/10 (478)8,682 times
Android 10
OS Version
2020-04-09
First release
other regions until 2020-04-10
n/a
Security patch
1
Countries
1
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: SCV39KDU1CTC2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SCV39
    KDI Japan
    		SCV39KDI1CTC2 2020-04-10 2020-05-20 4.113 GiB
    SCV39_2_20221124153321_ygbjqpnlo8_fac.zip
    SCV39
    KDI Japan
    		KDU1CTC21CTC2 2020-04-09 — — —

    No matching downloads

    How to flash SCV39KDU1CTC2

    • SCV39KDU1CTC2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    SCV39KDU1CTC2 is Android 10 firmware for Samsung Galaxy S9+, released for Japan (KDI). Samsung built it on 2020-04-09.

    No. A newer build for SCV39 is available: SCV39KDS1CVK1. Install it instead of SCV39KDU1CTC2 unless you need this exact version. The previous build was SCV39KDU1CTB3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 4.113 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S9+ must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy S9+ running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 11 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S9+

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region