SM-T210 2 countries Android 4.4.2 (Jelly)

Samsung Galaxy Tab3 7.0 T210ZSAMK1 Firmware

Name: Samsung Galaxy Tab3 7.0 (SM-T210)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab3 7.0 T210ZSAMK1 is an Android 4.4.2 (Jelly) firmware for Hong Kong SAR China (TGY), Taiwan (BRI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T210ZCANH1 https://samfirm.shop/build/T210ZCANH1: Android updated from Jelly(Android Bean) to Android 4.4.2 (Jelly); bootloader binary raised from C (12) to S (28), so after installing it there is no way back to older builds. A newer build for SM-T210 is available: T210XXBPJ2 https://samfirm.shop/build/T210XXBPJ2.

9.2/10 (471)8,458 times

Android 4.4.2 (Jelly)

OS Version

2013-11-19

Build Date

n/a

Security patch

Countries

CSC codes

S (28)

Bootloader binary

Bootloader binary S (28). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab3 7.0 use bootloader binary X (33) (latest: T210XXBPJ2). If your device already runs binary X (33), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: T210ZSAMK1

Model	Region	CSC Version	Size	File name	Download
SM-T210	BRI Taiwan	T210OZSAMK1	—	—
SM-T210	TGY Hong Kong SAR China	T210OZSAMK1	—	—

Device specifications

Launched withAndroid
Display diagonal17.8 cm (7")
Display resolution1024 x 600 pixels
Processor frequency1.2 GHz
Rear camera resolution3 MP
Rear camera typeSingle camera
Front camera resolution1.3 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight300 g

How to flash T210ZSAMK1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T210ZSAMK1 has bootloader binary S (28). Your device must run binary S (28) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T210ZSAMK1 is Android 4.4.2 (Jelly) firmware for Samsung Galaxy Tab3 7.0, released for Hong Kong SAR China (TGY), Taiwan (BRI). Samsung built it on 2013-11-19.

No. A newer build for SM-T210 is available: T210XXBPJ2. Install it instead of T210ZSAMK1 unless you need this exact version. The previous build was T210ZCANH1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab3 7.0 must be on bootloader binary S (28) or lower.

This build uses bootloader binary S (28). It can be flashed on a Samsung Galaxy Tab3 7.0 running binary S (28) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.