SM-T355Y 2 countries Android 6.0.1 (Lollipop)

Samsung Galaxy Tab A 8.0 T355YDOU1BPL2 Firmware

Name: Samsung Galaxy Tab A 8.0 (SM-T355Y)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab A 8.0 T355YDOU1BPL2 is an Android 6.0.1 (Lollipop) firmware for Australia (TEL, XSA), New Zealand (XNZ). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T355YDOU1BPJ1 https://samfirm.shop/build/T355YDOU1BPJ1: Android updated from Android 6.0.1 (Marshmallow) to Android 6.0.1 (Lollipop). A newer build for SM-T355Y is available: T355YDOS1CTJ2 https://samfirm.shop/build/T355YDOS1CTJ2.

8.8/10 (453)21,671 times

Android 6.0.1 (Lollipop)

OS Version

2016-12-12

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: T355YDOU1BPL2

Model	Region	CSC Version	Release date	Size	File name
SM-T355Y	TEL Australia	T355Y1BQB1	—	—	—
SM-T355Y	TEL Australia	T355YTEL1BQB1	2017-03-15	1.895 GiB	SM-T355Y_1_20201209160634_rmwz0lphen_fac.zip
SM-T355Y	XNZ New Zealand	T355Y1BPL2	—	—	—
SM-T355Y	XNZ New Zealand	T355YXNZ1BPL2	2016-12-23	1.887 GiB	SM-T355Y_1_20201208182734_82nmzlrd31_fac.zip
SM-T355Y	XSA Australia	T355Y1BPL2	—	—	—

Device specifications

Display diagonal20.3 cm (8")
Display resolution1024 x 768 pixels
Processor frequency1.2 GHz
Rear camera resolution5 MP
Rear camera typeSingle camera
Front camera resolution2 MP
Wi-Fi standard802.11a
Weight320 g

How to flash T355YDOU1BPL2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T355YDOU1BPL2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T355YDOU1BPL2 is Android 6.0.1 (Lollipop) firmware for Samsung Galaxy Tab A 8.0, released for Australia (TEL, XSA), New Zealand (XNZ). Samsung built it on 2016-12-12.

No. A newer build for SM-T355Y is available: T355YDOS1CTJ2. Install it instead of T355YDOU1BPL2 unless you need this exact version. The previous build was T355YDOU1BPJ1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A 8.0 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab A 8.0 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 27 other builds of this model use the same binary, so you can switch between them in both directions.