SM-T385L 1 country Android 9 (Pie)

Samsung Galaxy Tab A (2017) T385LKLU1CSK2 Firmware

Name: Samsung Galaxy Tab A (2017) (SM-T385L)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab A (2017) T385LKLU1CSK2 is an Android 9 (Pie) firmware for South Korea (LUC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T385LKLU1BSF2 https://samfirm.shop/build/T385LKLU1BSF2: Android updated from Android 8.1.0 (Pie) to Android 9 (Pie). A newer build for SM-T385L is available: T385LKLS2CUD2 https://samfirm.shop/build/T385LKLS2CUD2.

8.9/10 (471)8,842 times

Android 9 (Pie)

OS Version

2019-11-08

First release

other regions until 2019-11-11

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A (2017) use bootloader binary 2 (latest: T385LKLS2CUD2). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-T385L	LUC South Korea	T385LLUC1CSK2	T385N0KOU1CSI3	2019-11-11	2019-11-25	2.494 GiB	SM-T385L_2_20210422102607_zi0v4561io_fac.zip
SM-T385L	LUC South Korea	T385L1CSK2	T385LKLU1CSK2	2019-11-08	—	—	—

Device specifications

Launched withAndroid 7.1
Display diagonal20.3 cm (8")
Display resolution1280 x 800 pixels
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution5 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight364 g

Specifications of SM-T385M, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash T385LKLU1CSK2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T385LKLU1CSK2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T385LKLU1CSK2 is Android 9 (Pie) firmware for Samsung Galaxy Tab A (2017), released for South Korea (LUC). Samsung built it on 2019-11-08.

No. A newer build for SM-T385L is available: T385LKLS2CUD2. Install it instead of T385LKLU1CSK2 unless you need this exact version. The previous build was T385LKLU1BSF2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.494 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A (2017) must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Tab A (2017) running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.