SM-T385M 1 country Android 8.1.0 (Pie)

Samsung Galaxy Tab A (2017) T385MUBS2BSA3 Firmware

Name: Samsung Galaxy Tab A (2017) (SM-T385M)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab A (2017) T385MUBS2BSA3 is an Android 8.1.0 (Pie) firmware for Dominican Republic (CDR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T385MUBS2BSA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T385M is available: T385MUBS3CUF1.

9.4/10 (452)4,237 times

Android 8.1.0 (Pie)

OS Version

2019-01-18

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A (2017) use bootloader binary 3 (latest: T385MUBS3CUF1). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: T385MUBS2BSA3

Model	Region	CSC Version	Size	File name	Download
SM-T385M	CDR Dominican Republic	T385MUWA2BRK1	—	—

Device specifications

Launched withAndroid 7.1
Display diagonal20.3 cm (8")
Display resolution1280 x 800 pixels
Processor frequency1.4 GHz
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution5 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight364 g

How to flash T385MUBS2BSA3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T385MUBS2BSA3 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T385MUBS2BSA3 is Android 8.1.0 (Pie) firmware for Samsung Galaxy Tab A (2017), released for Dominican Republic (CDR). Samsung built it on 2019-01-18.

No. A newer build for SM-T385M is available: T385MUBS3CUF1. Install it instead of T385MUBS2BSA3 unless you need this exact version. The previous build was T385MUBS2BSA2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A (2017) must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A (2017) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 9 other builds of this model use the same binary, so you can switch between them in both directions.