SM-T387V 1 country Android 10

Samsung Galaxy Tab A 8.0 T387VVRU3CUB3 Firmware

Name: Samsung Galaxy Tab A 8.0 (SM-T387V)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab A 8.0 T387VVRU3CUB3 is an Android 10 firmware for United States (VZW). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T387VVRU2CTG9: Android updated from Android 10 (Oreo) to Android 10; bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. A newer build for SM-T387V is available: T387VVRU3CUI2.

8.9/10 (23)139 times

Android 10

OS Version

2021-02-25

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A 8.0 use bootloader binary 6 (latest: T387VVRU1ARG6_RGC). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: T387VVRU3CUB3

Model	Region	CSC Version	Release date	Size	File name	Download
SM-T387V	VZW United States	T387VVZW3CUB3	2021-03-31	2.73 GiB	SM-T387V_2_20210225161905_wia03ahiqj_fac.zip

Device specifications

Launched withAndroid 8.1 Oreo
Display diagonal20.3 cm (8")
Display resolution1280 x 800 pixels
Rear camera resolution5 MP
Front camera resolution2 MP
Wi-Fi standardWi-Fi 4 (802.11n)
Weight358.3 g

Specifications of SM-T387, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash T387VVRU3CUB3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T387VVRU3CUB3 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T387VVRU3CUB3 is Android 10 firmware for Samsung Galaxy Tab A 8.0, released for United States (VZW). Samsung built it on 2021-02-25.

No. A newer build for SM-T387V is available: T387VVRU3CUI2. Install it instead of T387VVRU3CUB3 unless you need this exact version. The previous build was T387VVRU2CTG9.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.73 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 8.0 must be on bootloader binary 3 or lower.

This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab A 8.0 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.