Samsung Galaxy Tab A T510XXU2ASJD
SM-T510 10 countries Android 9 (Pie)

Samsung Galaxy Tab A T510XXU2ASJD Firmware

Samsung Galaxy Tab A T510XXU2ASJD is an Android 9 (Pie) firmware for 10 countries, 11 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T510XXU2ASJA: Android updated from Android 9 to Android 9 (Pie). A newer build for SM-T510 is available: T510XXU5CWA1.

9.2/10 (473)47,239 times
Android 9 (Pie)
OS Version
2019-10-30
First release
other regions until 2019-11-07
2019-11-01
Security patch
10
Countries
11
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A use bootloader binary 5 (latest: T510XXU5CWA1). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: T510XXU2ASJD
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T510
    ARO Argentina
    CHO Chile
    COO Colombia
    EON Trinidad & Tobago
    +5 more countries
    GTO Guatemala
    MXO Mexico
    PEO Peru
    TPA Panama
    UPO, UYO Uruguay
    		T510OWO2ASJ4 2019-11-27 2.31 GiB
    SM-T510_1_20210313044235_u0tjks4zt5_fac.zip
    SM-T510
    ZTO Brazil
    		T510OWO2ASJ4 2019-11-27 2.372 GiB
    SM-T510_1_20210501015607_3fu6ry92k3_fac.zip

    No matching downloads

    How to flash T510XXU2ASJD

    • T510XXU2ASJD has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in T510XXU2ASJD

    · The stability of Bixby has been improved.
    · The security of your device has been improved.

    Rollout of T510XXU2ASJD by region

    First release
    November 27, 2019
    Last region
    December 5, 2019
    Duration
    9 days
    Regions
    11
    1. Day 1 · · 10 regions
      ArgentinaAROBrazilZTOChileCHOColombiaCOOGuatemalaGTOPanamaTPAPeruPEOTrinidad & TobagoEONUruguayUPOUYO
    2. Day 9 · · 1 region
      MexicoMXO

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal25.6 cm (10.1")
    • Display resolution1920 x 1200 pixels
    • Processor frequency1.8 GHz
    • Processor familySamsung Exynos
    • Processor model7904
    • Rear camera resolution8 MP
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight469 g

    Frequently Asked Questions

    T510XXU2ASJD is Android 9 (Pie) firmware for Samsung Galaxy Tab A, released for 10 countries, 11 CSC codes. It includes the 2019-11-01 security patch. Samsung built it on 2019-10-30.

    No. A newer build for SM-T510 is available: T510XXU5CWA1. Install it instead of T510XXU2ASJD unless you need this exact version. The previous build was T510XXU2ASJA.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 10 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    • GPS
    The stability has been improved.
    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • GPS
    The stability has been improved.
    • Overall stability of your device has been improved.
    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    Show 14 older builds

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Following applications or features added: Private Share
    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.
    ※ After the updating, it is needed to agree to the terms and conditions due to the enforcement of the Personal Information Protection act.

    • Overall stability of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    • LGPD (General Personal Data Protection Law) has been applied.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    · The security of your device has been improved.

    - The latest Android security patch has been applied.
    ㆍDevice security has been further enhanced.

    Model firmware by region