Samsung Galaxy Tab A T515XXU3ASJD
SM-T515 12 countries Android 9 (Pie)

Samsung Galaxy Tab A T515XXU3ASJD Firmware

Samsung Galaxy Tab A T515XXU3ASJD is an Android 9 (Pie) firmware for 12 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T515XXS3ASJ6, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T515 is available: T515XXU8CWD2.

9.2/10 (469)65,241 times
Android 9 (Pie)
OS Version
2019-10-30
First release
other regions until 2019-12-10
2019-11-01
Security patch
12
Countries
14
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A use bootloader binary 8 (latest: T515XXU8CWD2). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    MODEM/CP Version: T515XXU3ASJD
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T515
    ARO Argentina
    BVO Bolivia
    CHO Chile
    COO Colombia
    +4 more countries
    EON Trinidad & Tobago
    GTO Guatemala
    TPA Panama
    UPO, UYO Uruguay
    		T515OWO3ASL1, T515OWO3ASJD 2019-12-10 2019-12-03 2.429 GiB
    SM-T515_1_20210312071636_cdjf56ac99_fac.zip
    SM-T515
    ECO Ecuador
    PET Peru
    TCE Mexico
    		T515OWA3ASK1, T515OWA3ASJD 2019-11-27 2019-12-03 2.559 GiB
    SM-T515_1_20210312071106_8ugscrqecr_fac.zip
    SM-T515
    SAM Peru
    		T515OWT3ASK1 2019-11-27 2020-01-10 2.416 GiB
    SM-T515_1_20210312230006_sbdf8c719u_fac.zip
    SM-T515
    ZTO Brazil
    		T515OWO3ASJD 2019-11-07 2019-12-03 2.494 GiB
    SM-T515_1_20210501015037_hzfa9tjjku_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal25.6 cm (10.1")
    • Display resolution1920 x 1200 pixels
    • Processor frequency1.8 GHz
    • Processor familySamsung Exynos
    • Processor model7904
    • Rear camera resolution8 MP
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight470 g

    What's new in T515XXU3ASJD

    · The security of your device has been improved.

    How to flash T515XXU3ASJD

    • T515XXU3ASJD has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    T515XXU3ASJD is Android 9 (Pie) firmware for Samsung Galaxy Tab A, released for 12 countries, 14 CSC codes. It includes the 2019-11-01 security patch. Samsung built it on 2019-10-30.

    No. A newer build for SM-T515 is available: T515XXU8CWD2. Install it instead of T515XXU3ASJD unless you need this exact version. The previous build was T515XXS3ASJ6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Tab A must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Tab A running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 12 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A

    • Overall stability of functions improved.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 15 older builds

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Following applications or features added: Private Share
    • The security of your device has been improved.

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    · Overall stability of functions improved.

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    • The security of your device has been improved.

    Model firmware by region