Samsung Galaxy Tab A 10.1 T587JVS6CTC1
SM-T587 https://samfirm.shop/model/SM-T587 1 country Android 6.0.1 (Marshmallow)

Samsung Galaxy Tab A 10.1 T587JVS6CTC1 Firmware

Samsung Galaxy Tab A 10.1 T587JVS6CTC1 is an Android 6.0.1 (Marshmallow) firmware for Turkey (TUR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T587JVS5CSG1 https://samfirm.shop/build/T587JVS5CSG1: Android updated from Android 8.1.0 (Oreo) to Android 6.0.1 (Marshmallow); bootloader binary raised from 5 to 6, so after installing it there is no way back to older builds. This is the newest build for SM-T587.

9.1/10 (454)8,831 times
Android 6.0.1 (Marshmallow)
OS Version
2020-03-26
First release
other regions until 2020-06-05
n/a
Security patch
1
Countries
1
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T587JVS6CTC1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-T587
    TUR Turkey
    T587TUR6CTC1 2020-06-05 2020-06-05 1.987 GiB
    SM-T587_1_20200522183316_nwcsuerf6w_fac.zip
    SM-T587
    TUR Turkey
    T5876CTC1 2020-03-26 — — —

    No matching downloads

    How to flash T587JVS6CTC1

    • T587JVS6CTC1 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 6.0
    • Display diagonal25.6 cm (10.1")
    • Display resolution1920 x 1200 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight526 g

    Specifications of SM-T587P, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    T587JVS6CTC1 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Tab A 10.1, released for Turkey (TUR). Samsung built it on 2020-03-26.

    Yes. T587JVS6CTC1 is the newest build for SM-T587 on SamFirm. The previous build was T587JVS5CSG1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.987 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A 10.1 must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy Tab A 10.1 running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 6.

    Other builds and changelog for Samsung Galaxy Tab A 10.1

    No changelog details available.

    · The security of your device has been improved.

    https://samfirm.shop/build/T587JVU4CRK3
    No changelog details available.