Samsung Galaxy Tab A (2018, 10.5) T597JXU4BSI2
SM-T597 1 country Android 9 (Pie)

Samsung Galaxy Tab A (2018, 10.5) T597JXU4BSI2 Firmware

Samsung Galaxy Tab A (2018, 10.5) T597JXU4BSI2 is an Android 9 (Pie) firmware for Turkey (TUR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T597JXU3BSF6: bootloader binary raised from 3 to 4, so after installing it there is no way back to older builds; security patch 2019-09-01 instead of 2019-06-01. A newer build for SM-T597 is available: T597JXS4CUK1.

9.4/10 (36)4,611 times
Android 9 (Pie)
OS Version
2019-09-24
First release
other regions until 2019-10-11
2019-09-01
Security patch
1
Countries
1
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-T597
    TUR Turkey
    		T597TUR4BSI2T597JXU4BSH1 2019-10-11 2019-11-01 2.511 GiB
    SM-T597_1_20191011190627_62fl8g18k7_fac.zip
    SM-T597
    TUR Turkey
    		T5974BSI2T597JXU4BSI2 2019-09-24 2019-11-01 — —

    No matching downloads

    Device specifications

    • Launched withAndroid 7.0
    • Display diagonal26.7 cm (10.5")
    • Display resolution1920 x 1080 pixels
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight529 g

    Specifications of SM-T597VZ, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    What's new in T597JXU4BSI2

    · The following functions have been added : Bixby
    · The security of your device has been improved.

    How to flash T597JXU4BSI2

    • T597JXU4BSI2 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    T597JXU4BSI2 is Android 9 (Pie) firmware for Samsung Galaxy Tab A (2018, 10.5), released for Turkey (TUR). It includes the 2019-09-01 security patch. Samsung built it on 2019-09-24.

    No. A newer build for SM-T597 is available: T597JXS4CUK1. Install it instead of T597JXU4BSI2 unless you need this exact version. The previous build was T597JXU3BSF6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.511 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A (2018, 10.5) must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy Tab A (2018, 10.5) running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 9 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A (2018, 10.5)

    • The security of your device has been improved.

    • Enhanced Quick Share
    - Improve file sharing between Galaxy devices using Quick Share.
    • The security of your device has been improved.

    • The security of your device has been improved.

    · Security patch update

    • Added new feature. - Music Share
    • The security of your device has been improved.

    Show 10 older builds
    One UI 2 upgrade with Android 10

    One UI 2 brings you Android 10, with exciting new features from Samsung and Google based on feedback from users like you.
    We recommend that you back up your important data to keep it safe during the upgrade.
    Some apps, including Calculator, Samsung Internet, and Samsung Notes, need to be updated individually after you update your OS.

    Here's what's new.

    Dark mode
    - Enhanced image, text, and color adjustments for day and night environments.
    - Darkened wallpapers...

    · Overall stability of functions improved.

    · The security of your device has been improved.

    · The security of your device has been improved.

    · The following functions have been added : Bixby
    · The security of your device has been improved.

    Upgraded One UI for Android Pie 9.0

    One UI brings you Android Pie 9.0, with exciting new features and a whole new look and feel based on feedback from users in Samsung and Google.
    We recommend that you back up your important data to keep it safe before the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Notes, and Samsung Members, need to be updated individually after you update your OS.
    To use the Remote unlock function in Find My Mobile on an Android Pie 9.0 device, the sc...

    · The security of your device has been improved.

    · The security of your device has been improved.

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region