SM-T715N0 1 country Android 6.0.1 (Nougat)

Samsung Galaxy Tab S2 8.0 T715N0KOU2BPI2 Firmware

Name: Samsung Galaxy Tab S2 8.0 (SM-T715N0)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab S2 8.0 T715N0KOU2BPI2 is an Android 6.0.1 (Nougat) firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T715N0KOU2BPE8 https://samfirm.shop/build/T715N0KOU2BPE8, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T715N0 is available: T715N0KOS2CTJ3 https://samfirm.shop/build/T715N0KOS2CTJ3.

8.7/10 (498)8,763 times

Android 6.0.1 (Nougat)

OS Version

2016-09-20

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Release date	Size	File name	Download
SM-T715N0	KOO South Korea	T715N02BPI2	T715N0KOU2BPI2	—	—	—
SM-T715N0	KOO South Korea	T715N0KOO2BPI2	T715N0KOU2BPI1	2016-09-26	1.648 GiB	SM-T715N0_1_20201112163233_7b4cga422q_fac.zip

Device specifications

Launched withAndroid
Display diagonal20.3 cm (8")
Display resolution2048 x 1536 pixels
Display technologySuper AMOLED
Rear camera resolution8 MP
Rear camera typeSingle camera
Front camera resolution2.1 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight272 g

Specifications of SM-T715NZWE, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash T715N0KOU2BPI2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T715N0KOU2BPI2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T715N0KOU2BPI2 is Android 6.0.1 (Nougat) firmware for Samsung Galaxy Tab S2 8.0, released for South Korea (KOO). Samsung built it on 2016-09-20.

No. A newer build for SM-T715N0 is available: T715N0KOS2CTJ3. Install it instead of T715N0KOU2BPI2 unless you need this exact version. The previous build was T715N0KOU2BPE8.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.648 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab S2 8.0 must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab S2 8.0 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.