SM-T805M 1 country Android 5.0.2 (KitKat)

Samsung Galaxy TabS 10.5 T805MUBS1CSB1 Firmware

Name: Samsung Galaxy TabS 10.5 (SM-T805M)
Brand: Samsung
Availability: InStock

Samsung Galaxy TabS 10.5 T805MUBS1CSB1 is an Android 5.0.2 (KitKat) firmware for Brazil (ZTO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T805MUBU1CPJ2 https://samfirm.shop/build/T805MUBU1CPJ2: Android updated from Android 5.0.2 (Lollipop) to Android 5.0.2 (KitKat). This is the newest build for SM-T805M.

8.8/10 (451)8,833 times

Android 5.0.2 (KitKat)

OS Version

2019-01-30

First release

other regions until 2019-03-13

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-T805M	ZTO Brazil	T805MZTO1CSB1	T805MUBU1CPJ1	2019-03-13	2019-03-13	1.852 GiB	SM-T805M_1_20190313105427_dwk157gfdm_fac.zip
SM-T805M	ZTO Brazil	T805M1CSB1	T805MUBS1CSB1	2019-01-30	—	—	—

Device specifications

Launched withAndroid
Display diagonal26.7 cm (10.5")
Display resolution2560 x 1600 pixels
Display technologySuper AMOLED
Rear camera resolution8 MP
Front camera resolution2.1 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight467 g

Specifications of SM-T805, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash T805MUBS1CSB1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T805MUBS1CSB1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T805MUBS1CSB1 is Android 5.0.2 (KitKat) firmware for Samsung Galaxy TabS 10.5, released for Brazil (ZTO). Samsung built it on 2019-01-30.

Yes. T805MUBS1CSB1 is the newest build for SM-T805M on SamFirm. The previous build was T805MUBU1CPJ2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.852 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy TabS 10.5 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy TabS 10.5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 24 other builds of this model use the same binary, so you can switch between them in both directions.