Samsung Galaxy TabS 10.5 T805YDOU1ANI3
SM-T805Y 1 country Android 4.4.2 (KitKat)

Samsung Galaxy TabS 10.5 T805YDOU1ANI3 Firmware

Samsung Galaxy TabS 10.5 T805YDOU1ANI3 is an Android 4.4.2 (KitKat) firmware for New Zealand (TNZ). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T805YDOU1ANG2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T805Y is available: T805YDOU1CVG1.

8.9/10 (472)4,262 times
Android 4.4.2 (KitKat)
OS Version
2014-09-10
Build Date
n/a
Security patch
1
Countries
1
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: T805YDOU1ANI2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-T805Y
    TNZ New Zealand
    		T805YTNZ1ANI2 2014-10-02 1.905 GiB
    SM-T805Y_1_20220810155120_wcozba41ri_fac.zip

    No matching downloads

    How to flash T805YDOU1ANI3

    • T805YDOU1ANI3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid
    • Display diagonal26.7 cm (10.5")
    • Display resolution2560 x 1600 pixels
    • Processor frequency1.9 GHz
    • Processor familySamsung Exynos
    • Processor model5 Octa
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Front camera resolution2.1 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight467 g

    Frequently Asked Questions

    T805YDOU1ANI3 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy TabS 10.5, released for New Zealand (TNZ). Samsung built it on 2014-09-10.

    No. A newer build for SM-T805Y is available: T805YDOU1CVG1. Install it instead of T805YDOU1ANI3 unless you need this exact version. The previous build was T805YDOU1ANG2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.905 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy TabS 10.5 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy TabS 10.5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 22 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy TabS 10.5

    • GPS
    The stability has been improved.

    No changelog details available.
    Model firmware by region