SM-T905 2 countries Android 5.1.1 (Lollipop)

Samsung Galaxy Tab Pro 12.2 T905XXSBPL2 Firmware

Name: Samsung Galaxy Tab Pro 12.2 (SM-T905)
Brand: Samsung
Availability: InStock

Samsung Galaxy Tab Pro 12.2 T905XXSBPL2 is an Android 5.1.1 (Lollipop) firmware for Nordic Europe (NEE), United Kingdom (BTU). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build T905XXSBPL1 https://samfirm.shop/build/T905XXSBPL1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-T905 is available: T905XXUBPF1 https://samfirm.shop/build/T905XXUBPF1.

8.8/10 (471)8,538 times

Android 5.1.1 (Lollipop)

OS Version

2017-04-10

Build Date

n/a

Security patch

Countries

CSC codes

S (28)

Bootloader binary

Bootloader binary S (28). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab Pro 12.2 use bootloader binary U (30) (latest: T905XXUBPF1). If your device already runs binary U (30), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: T905XXUBOH2

Model	Region	CSC Version	Build Date	Release date	Size	File name	Download
SM-T905	BTU United Kingdom	T905OXABOH8	—	—	—	—
SM-T905	NEE Nordic Europe	T905OXABOH8	2017-04-10	2017-04-10	1.28 GiB	SM-T905_1_20170410114052_0jdo9z2yqy_fac.zip

Device specifications

Launched withAndroid
Display diagonal31 cm (12.2")
Display resolution2560 x 1600 pixels
Display technologyLCD
Processor frequency2.3 GHz
Processor familyQualcomm Snapdragon
Processor model800
Rear camera resolution8 MP
Front camera resolution2 MP
Wi-Fi standardWi-Fi 5 (802.11ac)
Weight737 g

How to flash T905XXSBPL2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

T905XXSBPL2 has bootloader binary S (28). Your device must run binary S (28) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

T905XXSBPL2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy Tab Pro 12.2, released for Nordic Europe (NEE), United Kingdom (BTU). Samsung built it on 2017-04-10.

No. A newer build for SM-T905 is available: T905XXUBPF1. Install it instead of T905XXSBPL2 unless you need this exact version. The previous build was T905XXSBPL1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.28 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab Pro 12.2 must be on bootloader binary S (28) or lower.

This build uses bootloader binary S (28). It can be flashed on a Samsung Galaxy Tab Pro 12.2 running binary S (28) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.