Samsung Galaxy Gear V700XXUAMII Firmware
Samsung Galaxy Gear V700XXUAMII is an Android 2.2.1.1 (Jelly) firmware for Iran (THR), United States (XAR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build V623E0ARH1: bootloader binary raised from 0 to U (30), so after installing it there is no way back to older builds. A newer build for SM-V700 is available: V700XXUCPK1.
9.3/10 (471)8,762 times
Android 2.2.1.1 (Jelly)
OS Version
2013-09-16
Build Date
n/a
Security patch
2
Countries
2
CSC codes
U (30)
Bootloader binary
Bootloader binary U (30). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
MODEM/CP Version: V700XXUAMII
Device specifications
- Display diagonal4.14 cm (1.63")
- Display technologyOLED
- Display resolution320 x 320 pixels
- Processor frequency800 MHz
- RAM512 MB
- Flash memory4 GB
- Battery capacity315 mAh
- Weight73.8 g
- Band colourWhite
How to flash V700XXUAMII
- Install Samsung USB Drivers:Download Official Drivers
- Download Odin Flash Tool:
- V700XXUAMII has bootloader binary U (30). Your device must run binary U (30) or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Frequently Asked Questions
V700XXUAMII is Android 2.2.1.1 (Jelly) firmware for Samsung Galaxy Gear, released for Iran (THR), United States (XAR). Samsung built it on 2013-09-16.
No. A newer build for SM-V700 is available: V700XXUCPK1. Install it instead of V700XXUAMII unless you need this exact version. The previous build was V623E0ARH1.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Gear must be on bootloader binary U (30) or lower.
This build uses bootloader binary U (30). It can be flashed on a Samsung Galaxy Gear running binary U (30) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 10 other builds of this model use the same binary, so you can switch between them in both directions.