Samsung Galaxy Tab A8 X200ZCU2CWD3

Samsung Galaxy Tab A8 X200ZCU2CWD3 Firmware

Samsung Galaxy Tab A8 X200ZCU2CWD3 is an Android 13 firmware for China (CHN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build X200XXS2CWD2 https://samfirm.shop/build/X200XXS2CWD2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-X200 is available: X200XXS6DYG6 https://samfirm.shop/build/X200XXS6DYG6.

8.9/10 (466)3,866 times
Android 13
OS Version
2023-05-08
Build Date
2023-02-01
Security patch
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab A8 use bootloader binary 6 (latest: X200XXS6DYG6 https://samfirm.shop/build/X200XXS6DYG6). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: X200ZCU2CWD3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-X200
    CHN China
    X200CHN2CWD3 2023-05-08 3.764 GiB
    SM-X200_3_20230426093800_a9mbcv8zul_fac.zip

    No matching downloads

    How to flash X200ZCU2CWD3

    • X200ZCU2CWD3 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in X200ZCU2CWD3

    One UI 5.1 Update
    One UI 5.1 takes your tablet to the next level with new Gallery features as well as productivity and personalization enhancements.

    Camera and Gallery

    Quickly change the color tone for selfies
    It's easier to change the color tone of your selfies using the Effects button on the side of the screen.

    More powerful search
    You can now search your Gallery for more than one person or subject at the same time. You can even search for people without tagging their names just by tapping their faces.

    Revamped info display
    When you swipe up while viewing a picture or video in your Gallery, you can see when and where the picture was taken, which device took the picture, where the picture is stored, and more. Now with a simpler layout.

    Multitasking

    Easily minimize or switch to full screen
    You can now minimize or maximize an app window without going to the options menu. Just drag one of the corners.

    Access your most used apps in split screen
    When you start a split-screen view, the apps you use most often will be shown below your recently used apps to help you find the apps you need faster.

    Modes and Routines

    Change wallpapers based on your mode
    Set a different wallpaper based on your current activity. Choose one wallpaper for work, one for exercising, and more.

    More actions for routines
    New actions let you control S Share and Touch sensitivity or change your font style.

    Weather

    Summary on Weather widget
    A brief summary of the current weather conditions now appears on the weather widget to let you know if it's sunny, cloudy, raining, or snowing.

    Samsung Internet

    Improved search
    Your searches now include the names of bookmark folders and tab groups. Improved search logic lets you find what you're looking for even if something isn't spelled correctly.

    Additional changes

    Check the battery level of your devices
    The new Battery widget lets you check the battery level of your devices, right from the Home screen. You can see how much battery is left on your tablet, Galaxy Buds, and other supported devices.

    Settings suggestions
    While signed in to your Samsung account, suggestions will appear at the top of the Settings screen to help you share, connect, and enhance your experience across your Galaxy devices.

    Choose where to save screenshots and screen recordings
    You can now change the folder where screenshots and screen recordings are saved.

    ※ Some apps will be changed to deletable.
    ※ The following features will have menus added to the Settings app and Camera app.
    - Smart Manager : Settings → Smart Manager
    - My Files : Settings → My Files

    Device specifications

    • Launched withAndroid 11
    • Display diagonal26.7 cm (10.5")
    • Display resolution1920 x 1200 pixels
    • Display technologyLCD
    • Processor frequency2 GHz
    • Processor familyTiger
    • Processor modelT618
    • Rear camera resolution8 MP
    • Front camera resolution5 MP
    • Wi-Fi standardWi-Fi 5 (802.11ac)
    • Weight508 g

    Frequently Asked Questions

    X200ZCU2CWD3 is Android 13 firmware for Samsung Galaxy Tab A8, released for China (CHN). It includes the 2023-02-01 security patch. Samsung built it on 2023-05-08.

    No. A newer build for SM-X200 is available: X200XXS6DYG6. Install it instead of X200ZCU2CWD3 unless you need this exact version. The previous build was X200XXS2CWD2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.764 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab A8 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy Tab A8 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab A8

    https://samfirm.shop/build/X200XXS6DYG6

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    https://samfirm.shop/build/X200ZCS5DYA2

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    Customize alarm alerts
    Use an image, video, or AR emoji to create your own custom alert screens for each alarm. You can even change the layout of where the alarm information appears on the screen.

    More stickers to personalize your calendar
    You can now add up to 2 stickers for each date on y...

    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    More stickers to personalize your calendar
    You can now add up to 2 stickers for each date on your calendar. Stickers for events are now shown next to the event name in Month view.

    Revamped Calendar settings
    Calendar settings have been reorganized to be more intuitive. You can also set back...

    Show 12 older builds

    · The security of your device has been improved.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    One UI 6.0 Upgrade (Android 14)
    Quick panel

    New button layout
    The quick panel has a new layout that makes it easier to access the features you use most. Wi-Fi and Bluetooth now have their own dedicated buttons at the top of the screen, while visual features, like Dark mode and Eye comfort shield have been moved to the bottom. Other quick settings buttons appear in a customizable area in the middle.

    Instantly access the full quick panel
    By default, a compact quick panel with notifications ap...

    One UI 6.0 Upgrade (Android 14)
    Quick panel

    New button layout
    The quick panel has a new layout that makes it easier to access the features you use most. WLAN and Bluetooth now have their own dedicated buttons at the top of the screen, while visual features, like Dark mode and Eye comfort shield have been moved to the bottom. Other quick settings buttons appear in a customizable area in the middle.

    Instantly access the full quick panel
    By default, a compact quick panel with notifications app...

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...

    • Security
    The device is protected with improved security.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    https://samfirm.shop/build/X200ZCU3CWI4
    One UI 5.1.1 Update
    Multitasking

    Better app previews on the Recents screen
    The Recents screen now shows apps as they will appear after you open them. You can easily see if an app is opened in split screen, full screen, or as a pop-up.

    Easily switch from pop-up view to split screen
    Press and hold the handle at the top of the pop-up window, then drag the app to the side of the screen where you want it to be shown.

    Restore pop-ups snapped to the edge of the screen
    Drag an app in pop-up view t...