Samsung Galaxy Tab S10 FE 5G X528UVLS6BZA3
SM-X528U 2 countries Android 16

Samsung Galaxy Tab S10 FE 5G X528UVLS6BZA3 Firmware

Samsung Galaxy Tab S10 FE 5G X528UVLS6BZA3 is an Android 16 firmware for Canada (CHR, FMC, RWC, XAC), TBT. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build X528USQU6BYJ1: security patch 2026-01-01 instead of 2025-09-01. A newer build for SM-X528U is available: X528USQSDCZI2.

OS updates guaranteed until: Android 22Security updates until: Apr 27, 2032
8.8/10 (148)3,878 times
Android 16
OS Version
2026-02-06
Build Date
2026-01-01
Security patch
2
Countries
5
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Tab S10 FE 5G use bootloader binary D (13) (latest: X528USQSDCZI2). If your device already runs binary D (13), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: X528UVLS6BZA3
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-X528U
    CHR Canada
    		X528UOYV6BZA3 2026-02-06 2026-02-06 9.776 GiB
    SM-X528U_2_20260121205840_9yx7aa4cba_fac.zip
    SM-X528U
    FMC Canada
    		X528UOYV6BZA3 2026-02-06 2026-02-06 9.776 GiB
    SM-X528U_2_20260121213621_82yjf9a4id_fac.zip
    SM-X528U
    RWC Canada
    		X528UOYV6BZA3 2026-02-06 2026-02-06 9.776 GiB
    SM-X528U_2_20260121214954_7irbptpz5n_fac.zip
    SM-X528U
    TBT
    		X528UOYV6BZA3 2026-02-06 2026-02-06 9.776 GiB
    SM-X528U_2_20260121220401_04nnt548qk_fac.zip
    SM-X528U
    XAC Canada
    		X528UOYV6BZA3 2026-02-06 2026-02-06 9.776 GiB
    SM-X528U_2_20260121221721_k7rimohlrr_fac.zip

    No matching downloads

    How to flash X528UVLS6BZA3

    • X528UVLS6BZA3 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in X528UVLS6BZA3

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Security patch: January 2026

    SMR Jan-2026 fixes 32 vulnerabilities, 2 of them critical. Android Security Bulletin: 21, Samsung Semiconductor: 4, Samsung-specific issues (SVE): 7.

    Most severe Samsung fixes:

    • high Improper input validation in SecSettings prior to SMR Jan-2026 Release 1 allows local attacker to access file with system privilege. User interaction is required for triggering this vulnerability. (CVE-2026-20969)
    • high Use After Free in PROCA driver prior to SMR Jan-2026 Release 1 allows local attackers to potentially execute arbitrary code. (CVE-2026-20971)
    • high Out-of-bounds read in libimagecodec.quram.so prior to SMR Jan-2026 Release 1 allows remote attacker to access out-of-bounds memory. (CVE-2026-20973)

    All fixes and Galaxy models with this patch

    Rollout of X528UVLS6BZA3 by region

    Samsung released this build in all regions (5) on the same day, February 6, 2026.

    Device specifications

    • Display diagonal27.7 cm (10.9")
    • Display resolution2304 x 1440 pixels
    • Processor frequency1.9 GHz
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Front camera resolution12 MP
    • Wi-Fi standardWi-Fi 6 (802.11ax)
    • Weight500 g

    Frequently Asked Questions

    X528UVLS6BZA3 is Android 16 firmware for Samsung Galaxy Tab S10 FE 5G, released for Canada (CHR, FMC, RWC, XAC), TBT. It includes the 2026-01-01 security patch. Samsung built it on 2026-02-06.

    SMR Jan-2026 fixes 32 vulnerabilities, 2 of them critical. Android Security Bulletin: 21, Samsung Semiconductor: 4, Samsung-specific issues (SVE): 7.

    No. A newer build for SM-X528U is available: X528USQSDCZI2. Install it instead of X528UVLS6BZA3 unless you need this exact version. The previous build was X528USQU6BYJ1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 9.776 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Tab S10 FE 5G must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy Tab S10 FE 5G running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Tab S10 FE 5G

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    One UI 8.5
    Visual design

    Fresh new look
    One UI seamlessly integrates into your daily routine by combining immersive visuals with meaningful personalization for a more refined and sophisticated design. Transparent blur effects add depth and make content easier to navigate, while floating elements react organically to your workflow for a more focused experience. Through familiar and intuitive data visualization, One UI delivers a design that feels both personal and relatable, helping you focus...

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    One UI 8.5
    Visual design

    Fresh new look
    One UI seamlessly integrates into your daily routine by combining immersive visuals with meaningful personalization for a more refined and sophisticated design. Transparent blur effects add depth and make content easier to navigate, while floating elements react organically to your workflow for a more focused experience. Through familiar and intuitive data visualization, One UI delivers a design that feels both personal and relatable, helping you focus...

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 5 older builds

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    One UI 8.0 (Android 16)
    Personalization

    Enhanced Lock screen widgets
    Do more on your Lock screen with brief widgets. 2 x 2 size widgets are now available, and the widget area is now larger so you can add even more widgets. You can choose either a horizontal or vertical widget layout.

    Productivity

    Check stock prices without unlocking
    Stocks you follow on Google Finance with big price changes will appear on your Now bar at the end of the trading day.

    Easier file sharing with Quick Share
    I...

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Model firmware by region