SM-Z200Y 1 country Android 6.0.1

Samsung Z2 Z200YXXU0BPL2 Firmware

Name: Samsung Z2 (SM-Z200Y)
Brand: Samsung
Availability: InStock

Samsung Z2 Z200YXXU0BPL2 is an Android 6.0.1 firmware for Kenya (AFR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build Z200YXXU0BPK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-Z200Y is available: Z200YXXE0BRG1.

9.3/10 (452)4,274 times

Android 6.0.1

OS Version

2016-12-16

First release

other regions until 2017-02-13

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-Z200Y	AFR Kenya	Z200YOJV0BPL2	Z200YXXU0BPL2	2017-02-13	—	—	—
SM-Z200Y	AFR Kenya	Z200YOJV0BPL2	Z200YXXU0BPI2	2016-12-16	2016-12-20	640.03 MiB	SM-Z200Y_1_20161216163713_706w6dqxpw_fac.zip

How to flash Z200YXXU0BPL2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

Z200YXXU0BPL2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

Z200YXXU0BPL2 is Android 6.0.1 firmware for Samsung Z2, released for Kenya (AFR). Samsung built it on 2016-12-16.

No. A newer build for SM-Z200Y is available: Z200YXXE0BRG1. Install it instead of Z200YXXU0BPL2 unless you need this exact version. The previous build was Z200YXXU0BPK1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 640.03 MiB; keep about twice that free on the computer to unzip it. The Samsung Z2 must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Z2 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.