SM-A015V 2 countries Android 11

Samsung Galaxy A01 A015VVRU4BUE4 Firmware

Name: Samsung Galaxy A01 (SM-A015V)
Brand: Samsung
Availability: InStock

Samsung Galaxy A01 A015VVRU4BUE4 is an Android 11 firmware for United States (VZW), VPP. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A015VVRU2ATG3: Android updated from Android 10 to Android 11; bootloader binary raised from 2 to 4, so after installing it there is no way back to older builds. A newer build for SM-A015V is available: A015VVRSACXA2.

9.1/10 (37)325 times

Android 11

OS Version

2021-05-17

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A01 use bootloader binary A (10) (latest: A015VVRSACXA2). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: A015VVRU4BUE4

Model	Region	CSC Version	Release date	Size	File name	Download
SM-A015V	VZW United States VPP	A015VVZW4BUE4	2021-06-16	3.018 GiB	SM-A015V_1_20210517090507_7eckc23ln8_fac.zip

Device specifications

Display diagonal14.5 cm (5.7")
Display resolution720 x 1520 pixels
Display typePLS
RAM2 GB
Rear camera resolution13 MP
Rear camera typeDual camera
Battery capacity3000 mAh
Weight149 g

Specifications of SM-A015F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A015VVRU4BUE4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A015VVRU4BUE4 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A015VVRU4BUE4 is Android 11 firmware for Samsung Galaxy A01, released for United States (VZW), VPP. Samsung built it on 2021-05-17.

No. A newer build for SM-A015V is available: A015VVRSACXA2. Install it instead of A015VVRU4BUE4 unless you need this exact version. The previous build was A015VVRU2ATG3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.018 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A01 must be on bootloader binary 4 or lower.

This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy A01 running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 4.