Samsung Galaxy A03 Core A032FXXS4BWH7
SM-A032F 1 country Android 12

Samsung Galaxy A03 Core A032FXXS4BWH7 Firmware

Samsung Galaxy A03 Core A032FXXS4BWH7 is an Android 12 firmware for New Zealand (XNZ). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A032FXXS4BWH5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A032F is available: A032FXXS9CZA2.

Download firmware
9.2/10 (482)3,697 times
Android 12
OS Version
2023-09-20
Build Date
2023-08-01
Security patch
1
Countries
1
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A03 Core use bootloader binary 9 (latest: A032FXXS9CZA2). If your device already runs binary 9, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A032FXXS4BWH5
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A032F
    XNZ New Zealand
    		A032FOLM4BWH7 2023-09-20 2.015 GiB
    SM-A032F_2_20230907132840_q5sbmyfe82_fac.zip

    No matching downloads

    How to flash A032FXXS4BWH7

    • A032FXXS4BWH7 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A032FXXS4BWH7

    • The security of your device has been improved.

    Device specifications

    • Launched withAndroid 11
    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • Processor frequency1.6 GHz
    • RAM2 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity5000 mAh
    • Weight211 g

    Frequently Asked Questions

    A032FXXS4BWH7 is Android 12 firmware for Samsung Galaxy A03 Core, released for New Zealand (XNZ). It includes the 2023-08-01 security patch. Samsung built it on 2023-09-20.

    No. A newer build for SM-A032F is available: A032FXXS9CZA2. Install it instead of A032FXXS4BWH7 unless you need this exact version. The previous build was A032FXXS4BWH5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.015 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A03 Core must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy A03 Core running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A03 Core

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    • OS upgrade - Andorid GO 13
    *We recommend that you back up your important data to keep it safe during the upgrade.
    *Some apps will need to be updated separately after the Android GO 13 upgrade.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    Show 5 older builds

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • OS upgrade - Andorid GO 12
    *We recommend that you back up your important data to keep it safe during the upgrade.
    *Some apps will need to be updated separately after the Android GO 12 upgrade.
    • Security
    The device is protected with improved security.

    Model firmware by region