Samsung Galaxy A03 Core A032MUBU2BWH1
SM-A032M 1 country Android 12

Samsung Galaxy A03 Core A032MUBU2BWH1 Firmware

Samsung Galaxy A03 Core A032MUBU2BWH1 is an Android 12 firmware for Dominican Republic (CDR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A032MUBS2BWG1: security patch 2023-07-01 instead of 2023-06-01. A newer build for SM-A032M is available: A032MUBS7CZA5.

8.7/10 (490)3,722 times
Android 12
OS Version
2023-09-09
Build Date
2023-07-01
Security patch
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A03 Core use bootloader binary 7 (latest: A032MUBS7CZA5). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A032MUBU2BWH1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A032M
    CDR Dominican Republic
    		A032MOWA2BWH1 2023-09-09 2.091 GiB
    SM-A032M_1_20230822231850_m110roc8bv_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 11
    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • RAM2 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity5000 mAh
    • Weight211 g

    Specifications of SM-A032F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    What's new in A032MUBU2BWH1

    • OS upgrade - Andorid GO 12
    *We recommend that you back up your important data to keep it safe during the upgrade.
    *Some apps will need to be updated separately after the Android GO 12 upgrade.
    • Security
    The device is protected with improved security.

    How to flash A032MUBU2BWH1

    • A032MUBU2BWH1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A032MUBU2BWH1 is Android 12 firmware for Samsung Galaxy A03 Core, released for Dominican Republic (CDR). It includes the 2023-07-01 security patch. Samsung built it on 2023-09-09.

    No. A newer build for SM-A032M is available: A032MUBS7CZA5. Install it instead of A032MUBU2BWH1 unless you need this exact version. The previous build was A032MUBS2BWG1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.091 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A03 Core must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A03 Core running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A03 Core

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 15 older builds

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.

    Model firmware by region