Samsung Galaxy A03s A037MUBU9CXG2
SM-A037M 1 country Android 13

Samsung Galaxy A03s A037MUBU9CXG2 Firmware

Samsung Galaxy A03s A037MUBU9CXG2 is an Android 13 firmware for Brazil (ZTA, ZTM, ZTO, ZVV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A037MUBS8CXE3: bootloader binary raised from 8 to 9, so after installing it there is no way back to older builds. A newer build for SM-A037M is available: A037MUBSBCYE4.

Download firmware
9.3/10 (433)10,312 times
Android 13
OS Version
2024-08-14
Build Date
2024-05-01
Security patch
1
Countries
4
CSC codes
9
Bootloader binary

Bootloader binary 9. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A03s use bootloader binary B (11) (latest: A037MUBSBCYE4). If your device already runs binary B (11), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A037MUBU9CXG2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A037M
    ZTA, ZTM, ZTO, ZVV Brazil
    		A037MOWO9CXG2 2024-08-15 4.476 GiB
    SM-A037M_3_20240802040120_ryzv3n6vgn_fac.zip
    		Download

    No matching downloads

    How to flash A037MUBU9CXG2

    • A037MUBU9CXG2 has bootloader binary 9. Your device must run binary 9 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A037MUBU9CXG2

    • The Camera and Gallery functions have been improved.
    • Security
    The device is protected with improved security.

    Security patch: May 2024

    SMR May-2024 fixes 42 vulnerabilities, 3 of them critical. Android Security Bulletin: 30, Samsung-specific issues (SVE): 12.

    Most severe Samsung fixes:

    • high Authentication bypass in bootloader (CVE-2024-20865)

    All fixes and Galaxy models with this patch

    Rollout of A037MUBU9CXG2 by region

    Samsung released this build in all regions (4) on the same day, August 15, 2024.

    Device specifications

    • Launched withAndroid 11
    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeTriple camera
    • Battery capacity5000 mAh
    • Weight199 g

    Specifications of SM-A037G, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A037MUBU9CXG2 is Android 13 firmware for Samsung Galaxy A03s, released for Brazil (ZTA, ZTM, ZTO, ZVV). It includes the 2024-05-01 security patch. Samsung built it on 2024-08-14.

    SMR May-2024 fixes 42 vulnerabilities, 3 of them critical. Android Security Bulletin: 30, Samsung-specific issues (SVE): 12.

    No. A newer build for SM-A037M is available: A037MUBSBCYE4. Install it instead of A037MUBU9CXG2 unless you need this exact version. The previous build was A037MUBS8CXE3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 4.476 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A03s must be on bootloader binary 9 or lower.

    This build uses bootloader binary 9. It can be flashed on a Samsung Galaxy A03s running binary 9 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A03s

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • The security of your device has been improved.

    • The Camera and Gallery functions have been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    One UI 5.1 Update

    One UI 5.1 takes your phone to the next level with new Gallery features as well as productivity and personalization enhancements.

    Camera and Gallery

    Quickly change the color tone for selfies
    It's easier to change the color tone of your selfies using the Effects button at the top of the screen.

    Discover Expert RAW
    Expert RAW lets you take high-quality shots, perfect for those who want to have full control and edit photos later. Expert RAW is now easier to access from the M...

    Show 6 older builds

    • The security of your device has been improved.

    One UI 5.1 Update

    One UI 5.1 takes your phone to the next level with new Gallery features as well as productivity and personalization enhancements.

    Camera and Gallery

    Quickly change the color tone for selfies
    It's easier to change the color tone of your selfies using the Effects button at the top of the screen.

    Discover Expert RAW
    Expert RAW lets you take high-quality shots, perfect for those who want to have full control and edit photos later. Expert RAW is now easier to access from the M...

    • The security of your device has been improved.

    Model firmware by region