Samsung Galaxy A10e A102USQU4ASK7
SM-A102U 2 countries Android 9 (Pie)

Samsung Galaxy A10e A102USQU4ASK7 Firmware

Samsung Galaxy A10e A102USQU4ASK7 is an Android 9 (Pie) firmware for CHA, United States (AIO, BST, SPR, USC, VMU, VZW, XAS). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A102USQS4ASK4: security patch 2019-12-01 instead of 2019-11-01. A newer build for SM-A102U is available: A102USQUGCWI1.

Download firmware
9.4/10 (473)34,917 times
Android 9 (Pie)
OS Version
2019-11-22
First release
other regions until 2019-11-26
2019-12-01
Security patch
2
Countries
8
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A10e use bootloader binary G (16) (latest: A102USQUGCWI1). If your device already runs binary G (16), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A102USQU4ASK7
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A102U
    AIO United States
    		A102UOYN4ASK7 2019-11-22 2019-12-19 3.147 GiB
    SM-A102U_1_20210617144607_5d4f5hc7zp_fac.zip
    SM-A102U
    BST United States
    		A102UOYN4ASK7 2019-11-22 2019-12-23 2.835 GiB
    SM-A102U_1_20220409131631_05xhj1d7wb_fac.zip
    SM-A102U
    CHA
    		A102UOYN4ASK7 2019-11-22 2019-12-16 3.193 GiB
    SM-A102U_1_20210617145709_u3hmodh2yw_fac.zip
    SM-A102U
    SPR United States
    		A102UOYN4ASK7 2019-11-25 2019-12-23 2.835 GiB
    SM-A102U_1_20220407234411_zt6luf3per_fac.zip
    SM-A102U
    USC United States
    		A102UOYN4ASK7 2019-11-26 2019-12-12 3.219 GiB
    SM-A102U_1_20210611205507_8nfvrfb2vb_fac.zip
    SM-A102U
    VMU United States
    		A102UOYN4ASK7 2019-11-22 2019-12-23 2.835 GiB
    SM-A102U_2_20220409132541_ixf4e7yr0x_fac.zip
    SM-A102U
    VZW United States
    		A102UOYN4ASK7 2019-11-22 2020-01-03 3.357 GiB
    SM-A102U_1_20210615222540_h7ixz2wi2d_fac.zip
    SM-A102U
    XAS United States
    		A102UOYN4ASK7 2019-11-22 2019-12-23 2.835 GiB
    SM-A102U_1_20220409132341_5s49kj2d3j_fac.zip

    No matching downloads

    How to flash A102USQU4ASK7

    • A102USQU4ASK7 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A102USQU4ASK7

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Rollout of A102USQU4ASK7 by region

    First release
    December 12, 2019
    Last region
    January 3, 2020
    Duration
    23 days
    Regions
    8
    1. Day 1 · · 1 region
      United StatesUSC
    2. Day 5 · · 1 region
      CHA
    3. Day 8 · · 1 region
      United StatesAIO
    4. Day 12 · · 4 regions
      United StatesBSTSPRVMUXAS
    5. Day 23 · · 1 region
      United StatesVZW

    Frequently Asked Questions

    A102USQU4ASK7 is Android 9 (Pie) firmware for Samsung Galaxy A10e, released for CHA, United States (AIO, BST, SPR, USC, VMU, VZW, XAS). It includes the 2019-12-01 security patch. Samsung built it on 2019-11-22.

    No. A newer build for SM-A102U is available: A102USQUGCWI1. Install it instead of A102USQU4ASK7 unless you need this exact version. The previous build was A102USQS4ASK4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A10e must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy A10e running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A10e

    Software and Terms & Conditions Update

    IMPORTANT INFORMATION: This update includes revised Terms & Conditions for your device, including the Dispute Resolution Agreement with arbitration terms. For more information, review https://www.samsung.com/us/support/legal/mobile/.
    ​By clicking “Install now,” by scheduling your install, or by continuing to use your device after installation, you agree to these revised Terms & Conditions.

    • Security
    The device is protected with improved security.

    No changelog details available.
    Software and Terms & Conditions Update

    IMPORTANT INFORMATION: This update includes revised Terms & Conditions for your device, including the Dispute Resolution Agreement with arbitration terms. For more information, review https://www.samsung.com/us/support/legal/mobile/.
    ​By clicking “Install now,” by scheduling your install, or by continuing to use your device after installation, you agree to these revised Terms & Conditions.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    · The security of your device has been improved.

    Show 15 older builds

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    No changelog details available.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    At T-Mobile, our customer's privacy and security is incredibly important. We pride ourselves on making sure your mobile experience is safe and secure. It is strongly recommended that you install this security patch to protect your device.
    This will not consume your data.  Please charge your device,  do not turn off the device while the update is installing. During installation you cannot use your device at all, even to dial 9-1-1.

    · Security patch update

    · The security of your device has been improved.

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    · The security of your device has been improved.

    · The security of your device has been improved.

    At T-Mobile, our customer's privacy and security is incredibly important. We pride ourselves on making sure your mobile experience is safe and secure. It is strongly recommended that you install this security patch to protect your device.
    This will not consume your data.  Please charge your device,  do not turn off the device while the update is installing. During installation you cannot use your device at all, even to dial 9-1-1.

    · The security of your device has been improved.

    Model firmware by region