Samsung Galaxy A10 A105MUBU3ASJ1
SM-A105M 2 countries Android 9 (Pie)

Samsung Galaxy A10 A105MUBU3ASJ1 Firmware

Samsung Galaxy A10 A105MUBU3ASJ1 is an Android 9 (Pie) firmware for Bolivia (BVT), Dominican Republic (CDR). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A105MUBU3ASI4: security patch 2019-10-01 instead of 2019-09-01. A newer build for SM-A105M is available: A105MUBU8CWE1.

Download firmware
8.9/10 (476)8,400 times
Android 9 (Pie)
OS Version
2019-10-10
First release
other regions until 2019-10-14
2019-10-01
Security patch
2
Countries
2
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A10 use bootloader binary 8 (latest: A105MUBU8CWE1). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: A105MUBU3ASJ1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A105M
    BVT Bolivia
    		A105MOWM3ASJ2 2019-10-10 2019-10-29 2.534 GiB
    SM-A105M_1_20210605020807_wsj69pf5n5_fac.zip
    		Download
    SM-A105M
    CDR Dominican Republic
    		A105MOWA3ASJ1 2019-10-14 2019-10-29 2.771 GiB
    SM-A105M_1_20210527234138_lm1xsnpqvn_fac.zip
    MD5:688c85cf2fae5b827af44a8edade3882
    SHA1:39edd93425b169ced55a3ee5536a40c5d9f359ac
    		Download

    No matching downloads

    How to flash A105MUBU3ASJ1

    • A105MUBU3ASJ1 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A105MUBU3ASJ1

    · The security of your device has been improved.

    Rollout of A105MUBU3ASJ1 by region

    Samsung released this build in all regions (2) on the same day, October 29, 2019.

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal15.8 cm (6.2")
    • Display resolution720 x 1520 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3400 mAh
    • Weight168 g

    Specifications of SM-A105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A105MUBU3ASJ1 is Android 9 (Pie) firmware for Samsung Galaxy A10, released for Bolivia (BVT), Dominican Republic (CDR). It includes the 2019-10-01 security patch. Samsung built it on 2019-10-10.

    No. A newer build for SM-A105M is available: A105MUBU8CWE1. Install it instead of A105MUBU3ASJ1 unless you need this exact version. The previous build was A105MUBU3ASI4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A10 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy A10 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 9 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A10

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 11 older builds

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    One UI 3 Upgrade (Android 11)
    One UI 3 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing.

    Scrol...

    • The security of your device has been improved.

    • LGPD (General Personal Data Protection Law) has been applied.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Model firmware by region