Samsung Galaxy A10 A105NKOU2BTD3
SM-A105N 1 country Android 10

Samsung Galaxy A10 A105NKOU2BTD3 Firmware

Samsung Galaxy A10 A105NKOU2BTD3 is an Android 10 firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A105NKOU2ASK2: Android updated from Android 9 (Pie) to Android 10. A newer build for SM-A105N is available: A105NKOS5CWA2.

Download firmware
8.9/10 (479)8,723 times
Android 10
OS Version
2020-04-10
First release
other regions until 2020-04-14
n/a
Security patch
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A10 use bootloader binary 5 (latest: A105NKOS5CWA2). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A105NKOU2BTD3
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A105N
    KOO South Korea
    		A105NKOO2BTD3 2020-04-14 2020-04-27 2.396 GiB
    SM-A105N_1_20210408171936_1c2utjlz1i_fac.zip
    SM-A105N
    KOO South Korea
    		A105N2BTD3 2020-04-10 — — —

    No matching downloads

    How to flash A105NKOU2BTD3

    • A105NKOU2BTD3 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 9.0
    • Display diagonal15.8 cm (6.2")
    • Display resolution720 x 1520 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity3400 mAh
    • Weight168 g

    Specifications of SM-A105, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A105NKOU2BTD3 is Android 10 firmware for Samsung Galaxy A10, released for South Korea (KOO). Samsung built it on 2020-04-10.

    No. A newer build for SM-A105N is available: A105NKOS5CWA2. Install it instead of A105NKOU2BTD3 unless you need this exact version. The previous build was A105NKOU2ASK2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.396 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A10 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A10 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A10

    No changelog details available.
    Model firmware by region