Samsung Galaxy A11 A115AUCS9CWL1
SM-A115A 1 country Android 12

Samsung Galaxy A11 A115AUCS9CWL1 Firmware

Samsung Galaxy A11 A115AUCS9CWL1 is an Android 12 firmware for United States (ATT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A115AUCU8CWL1: bootloader binary raised from 8 to 9, so after installing it there is no way back to older builds. This is the newest build for SM-A115A.

Download firmware
9.1/10 (487)3,184 times
Android 12
OS Version
2023-12-27
Build Date
1
Countries
1
CSC codes
9
Bootloader binary

Bootloader binary 9. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A115AUCS9CWL1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A115A
    ATT United States
    		A115AATT9CWL1 2023-12-27 3.101 GiB
    SM-A115A_3_20231212140110_xw317cb47h_fac.zip
    		Download

    No matching downloads

    How to flash A115AUCS9CWL1

    • A115AUCS9CWL1 has bootloader binary 9. Your device must run binary 9 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 10.0
    • Display diagonal16.3 cm (6.4")
    • Display resolution720 x 1560 pixels
    • Display typePLS
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeTriple camera
    • Battery capacity4000 mAh
    • Weight177 g

    Specifications of SM-A115, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A115AUCS9CWL1 is Android 12 firmware for Samsung Galaxy A11, released for United States (ATT). Samsung built it on 2023-12-27.

    Yes. A115AUCS9CWL1 is the newest build for SM-A115A on SamFirm. The previous build was A115AUCU8CWL1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.101 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A11 must be on bootloader binary 9 or lower.

    This build uses bootloader binary 9. It can be flashed on a Samsung Galaxy A11 running binary 9 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 9.

    Other builds and changelog for Samsung Galaxy A11

    No changelog details available.
    Model firmware by region