Samsung Galaxy A13 A135USQU1AVF2

Samsung Galaxy A13 A135USQU1AVF2 Firmware

Samsung Galaxy A13 A135USQU1AVF2 is an Android 12 firmware for DSH, United States (TMB, TMK, USC, VZW), VPP. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A135USQS1AVF1 https://samfirm.shop/build/A135USQS1AVF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A135U is available: A135USQSFEZB2 https://samfirm.shop/build/A135USQSFEZB2.

Download firmware
8.8/10 (492)26,412 times
Android 12
OS Version
2022-07-04
First release
other regions until 2022-08-02
2022-06-01
Security patch
3
Countries
6
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A13 use bootloader binary F (15) (latest: A135USQSFEZB2 https://samfirm.shop/build/A135USQSFEZB2). If your device already runs binary F (15), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A135USQU1AVF2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A135U
    DSH
    A135UOYN1AVF2 2022-07-25 2022-07-25 3.958 GiB
    SM-A135U_1_20220625144011_mk6uq7omhi_fac.zip
    Download
    SM-A135U
    TMB United States
    A135UOYN1AVF2 2022-07-25 2022-07-25 3.967 GiB
    SM-A135U_1_20220707184541_qypea2rjjo_fac.zip
    Download
    SM-A135U
    TMK United States
    A135UOYN1AVF2 2022-07-25 2022-07-25 3.967 GiB
    SM-A135U_1_20220707185800_tsytm5yw8d_fac.zip
    Download
    SM-A135U
    USC United States
    A135UOYN1AVF2 2022-08-02 2022-08-03 3.945 GiB
    SM-A135U_1_20220630150610_5orpvw882c_fac.zip
    Download
    SM-A135U
    VPP
    A135UOYN1AVF2 2022-07-04 2022-07-13 4.057 GiB
    SM-A135U_1_20220607083821_n8jwh8scbv_fac.zip
    Download
    SM-A135U
    VZW United States
    A135UOYN1AVF2 2022-07-04 2022-07-13 4.095 GiB
    SM-A135U_1_20220607082030_j5m903iphd_fac.zip
    Download

    No matching downloads

    How to flash A135USQU1AVF2

    • A135USQU1AVF2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A135USQU1AVF2

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Rollout of A135USQU1AVF2 by region

    First release
    July 13, 2022
    Last region
    August 3, 2022
    Duration
    22 days
    Regions
    6
    1. Day 1 · · 2 regions
      United StatesVZWVPP
    2. Day 13 · · 3 regions
      United StatesTMBTMKDSH
    3. Day 22 · · 1 region
      United StatesUSC

    Device specifications

    • Launched withAndroid 12
    • Display diagonal16.8 cm (6.6")
    • Display resolution1080 x 2408 pixels
    • RAM4 GB
    • Rear camera resolution50 MP
    • Rear camera typeQuad camera
    • Battery capacity5000 mAh
    • Weight195 g

    Specifications of SM-A135F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A135USQU1AVF2 is Android 12 firmware for Samsung Galaxy A13, released for DSH, United States (TMB, TMK, USC, VZW), VPP. It includes the 2022-06-01 security patch. Samsung built it on 2022-07-04.

    No. A newer build for SM-A135U is available: A135USQSFEZB2. Install it instead of A135USQU1AVF2 unless you need this exact version. The previous build was A135USQS1AVF1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A13 must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A13 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A13

    https://samfirm.shop/build/A135USQSFEZB2

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    https://samfirm.shop/build/A135USQSBEYA1

    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    https://samfirm.shop/build/A135USQU8EXF3
    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    Customize alarm alerts
    Use an image, video, or AR emoji to create your own custom alert screens for each alarm. You can even change the layout of where the alarm information appears on the screen.

    More stickers to personalize your calendar
    You can now add up to 2 stickers for each date on y...

    Show 10 older builds
    No changelog details available.

    • The security of your device has been improved.

    No changelog details available.
    One UI 6.1 Upgrade
    Create epic images

    Effortlessly enhance your photos
    Get special AI recommendations for enhancing your photos and videos. You'll find options for adding star trails, long exposure, colorizing, and more. Suggestions appear when you tap the i button in Gallery.

    Copy and paste from one image to another
    Add a missing element to your picture. Just clip an object from an image in Gallery, then go to the image where you want to paste it and choose Paste from clipboard in the More...

    • The security of your device has been improved.

    One UI 6.0 Upgrade (Android 14)
    Quick panel

    New button layout
    The quick panel has a new layout that makes it easier to access the features you use most. Wi-Fi and Bluetooth now have their own dedicated buttons at the top of the screen, while visual features, like Dark mode and Eye comfort shield have been moved to the bottom. Other quick settings buttons appear in a customizable area in the middle.

    Instantly access the full quick panel
    By default, a compact quick panel with notifications ap...

    https://samfirm.shop/build/A135USQS7CWK3

    • Security
    The device is protected with improved security.

    No changelog details available.

    • Software and Terms & Conditions Update
    IMPORTANT INFORMATION: This update includes revised Terms & Conditions for your device, including the Dispute Resolution Agreement with arbitration terms. For more information, review https://www.samsung.com/us/support/legal/mobile/.
    ​By clicking “Install now,” by scheduling your install, or by continuing to use your device after installation, you agree to these revised Terms & Conditions.
    • Stability and reliability
    Device behavior has been improved.
    •...