Samsung Galaxy A13 A137FXXS6EXG2
SM-A137F 26 countries Android 14

Samsung Galaxy A13 A137FXXS6EXG2 Firmware

Samsung Galaxy A13 A137FXXS6EXG2 is an Android 14 firmware for 26 countries, 32 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A137FXXU5EXE3: bootloader binary raised from 5 to 6, so after installing it there is no way back to older builds; security patch 2024-07-01 instead of 2024-05-01. A newer build for SM-A137F is available: A137FXXSCEZB1.

9.1/10 (414)82,429 times
Android 14
OS Version
2024-08-12
First release
other regions until 2024-08-19
2024-07-01
Security patch
26
Countries
32
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A13 use bootloader binary C (12) (latest: A137FXXSCEZB1). If your device already runs binary C (12), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    2
    MODEM/CP Version: A137FXXS6EXG2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A137F
    AFG Afghanistan
    EGY Egypt
    FWD, MWD Morocco
    ILO Israel
    +8 more countries
    KSA Saudi Arabia
    LYS Libya
    MID Iraq
    PAK Pakistan
    TUN Tunisia
    TUR Turkey
    XSG United Arab Emirates
    ILP
    		A137FOJM6EXG2 2024-08-19 2024-08-19 4.096 GiB
    SM-A137F_3_20240727172840_4tjzgexneq_fac.zip
    SM-A137F
    BOG, SFR France
    EUX, EUY Europe
    EVR United Kingdom
    MEO Portugal
    +9 more countries
    MET, TSI Ireland
    MOT, SIM Slovenia
    MSR Serbia
    O2C Czechia
    PLS, PRT Poland
    TIM Italy
    TOP Montenegro
    VIP Croatia
    BTB, BTE
    		A137FOXM6EXG2 2024-08-12 2024-08-13 4.717 GiB
    SM-A137F_3_20240725142651_cs7y9r7afl_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal16.8 cm (6.6")
    • Display resolution1080 x 2408 pixels
    • Processor frequency1.8 GHz
    • RAM4 GB
    • Rear camera resolution50 MP
    • Rear camera typeQuad camera
    • SIM cardsDual SIM
    • Battery capacity5000 mAh
    • Weight195 g

    What's new in A137FXXS6EXG2

    • Security
    The device is protected with improved security.

    How to flash A137FXXS6EXG2

    • A137FXXS6EXG2 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A137FXXS6EXG2 is Android 14 firmware for Samsung Galaxy A13, released for 26 countries, 32 CSC codes. It includes the 2024-07-01 security patch. Samsung built it on 2024-08-12.

    No. A newer build for SM-A137F is available: A137FXXSCEZB1. Install it instead of A137FXXS6EXG2 unless you need this exact version. The previous build was A137FXXU5EXE3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A13 must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A13 running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A13

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    Show 15 older builds

    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.

    • Security
    The device is protected with improved security.

    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.

    • Security
    The device is protected with improved security.

    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    More widgets for your Lock screen
    Additional widgets are available for your Lock screen so you can quickly check useful information without unlocking your phone. The new widgets include Weather, Samsung Health, Battery, Reminder, Calendar, and Clock.

    Customize alarm alerts
    Use an image, vid...

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    One UI 6.0 Upgrade
    Quick panel

    New button layout
    The quick panel has a new layout that makes it easier to access the features you use most. Wi-Fi and Bluetooth now have their own dedicated buttons at the top of the screen, while visual features, like Dark mode and Eye comfort shield have been moved to the bottom. Other quick settings buttons appear in a customizable area in the middle.

    Instantly access the full quick panel
    By default, a compact quick panel with notifications appears when yo...

    • The security of your device has been improved.

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region