Samsung Galaxy A13 A137FXXS3CWI3
SM-A137F 12 countries Android 13

Samsung Galaxy A13 A137FXXS3CWI3 Firmware

Samsung Galaxy A13 A137FXXS3CWI3 is an Android 13 firmware for 12 countries, 13 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A137FXXS3CWI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A137F is available: A137FXXSCEZB1.

Download firmware
8.8/10 (478)44,835 times
Android 13
OS Version
2023-09-27
Build Date
2023-09-01
Security patch
12
Countries
13
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A13 use bootloader binary C (12) (latest: A137FXXSCEZB1). If your device already runs binary C (12), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A137FXXU3CWE1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A137F
    AFG Afghanistan
    EGY Egypt
    FWD, MWD Morocco
    ILO Israel
    +8 more countries
    KSA Saudi Arabia
    LYS Libya
    MID Iraq
    PAK Pakistan
    TUN Tunisia
    TUR Turkey
    XSG United Arab Emirates
    ILP
    		A137FOJM3CWE1 2023-09-28 3.608 GiB
    SM-A137F_2_20230920173250_78gkig3jwt_fac.zip
    		Download

    No matching downloads

    How to flash A137FXXS3CWI3

    • A137FXXS3CWI3 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A137FXXS3CWI3

    · The security of your device has been improved.

    Rollout of A137FXXS3CWI3 by region

    Samsung released this build in all regions (13) on the same day, September 28, 2023.

    Device specifications

    • Display diagonal16.8 cm (6.6")
    • Display resolution1080 x 2408 pixels
    • Processor frequency1.8 GHz
    • RAM4 GB
    • Rear camera resolution50 MP
    • Rear camera typeQuad camera
    • SIM cardsDual SIM
    • Battery capacity5000 mAh
    • Weight195 g

    Frequently Asked Questions

    A137FXXS3CWI3 is Android 13 firmware for Samsung Galaxy A13, released for 12 countries, 13 CSC codes. It includes the 2023-09-01 security patch. Samsung built it on 2023-09-27.

    No. A newer build for SM-A137F is available: A137FXXSCEZB1. Install it instead of A137FXXS3CWI3 unless you need this exact version. The previous build was A137FXXS3CWI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.608 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A13 must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy A13 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A13

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.

    Show 13 older builds

    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.

    • Security
    The device is protected with improved security.

    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    More widgets for your Lock screen
    Additional widgets are available for your Lock screen so you can quickly check useful information without unlocking your phone. The new widgets include Weather, Samsung Health, Battery, Reminder, Calendar, and Clock.

    Customize alarm alerts
    Use an image, vid...

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    One UI 6.0 Upgrade
    Quick panel

    New button layout
    The quick panel has a new layout that makes it easier to access the features you use most. Wi-Fi and Bluetooth now have their own dedicated buttons at the top of the screen, while visual features, like Dark mode and Eye comfort shield have been moved to the bottom. Other quick settings buttons appear in a customizable area in the middle.

    Instantly access the full quick panel
    By default, a compact quick panel with notifications appears when yo...

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region