Samsung Galaxy A14 5G A146PZHSADXK3
SM-A146P 2 countries Android 14

Samsung Galaxy A14 5G A146PZHSADXK3 Firmware

Samsung Galaxy A14 5G A146PZHSADXK3 is an Android 14 firmware for Hong Kong SAR China (TGY), Taiwan (BRI). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A146PXXUADXK2: security patch 2024-12-01 instead of 2024-10-01. A newer build for SM-A146P is available: A146PXXULEZJ3.

OS updates guaranteed until: Android 15Security updates until: Jan 1, 2027
Download firmware
9.2/10 (352)4,260 times
Android 14
OS Version
2024-12-30
Build Date
2024-12-01
Security patch
2
Countries
2
CSC codes
A (10)
Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A14 5G use bootloader binary L (21) (latest: A146PXXULEZJ3). If your device already runs binary L (21), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A146PZHSADXK3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A146P
    BRI Taiwan
    TGY Hong Kong SAR China
    		A146POZSADXK3 2024-12-30 4.987 GiB
    SM-A146P_2_20241212091740_5aedd9ep63_fac.zip
    		Download

    No matching downloads

    How to flash A146PZHSADXK3

    • A146PZHSADXK3 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A146PZHSADXK3

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    Security patch: December 2024

    SMR Dec-2024 fixes 34 vulnerabilities, 2 of them critical. Android Security Bulletin: 26, Samsung Semiconductor: 2, Samsung-specific issues (SVE): 6.

    Most severe Samsung fixes:

    • critical Out-of-bound write in libsaped.so (CVE-2024-49415)
    • high Out-of-bounds write in libswmfextractor.so (CVE-2024-49410)
    • high Improper Verification of Cryptographic Signature in SmartSwitch (CVE-2024-49413)

    All fixes and Galaxy models with this patch

    Rollout of A146PZHSADXK3 by region

    Samsung released this build in all regions (2) on the same day, December 30, 2024.

    Device specifications

    • Display diagonal16.8 cm (6.6")
    • Display resolution1080 x 2408 pixels
    • RAM4 GB
    • Rear camera resolution50 MP
    • Rear camera typeTriple camera
    • SIM cardsDual SIM
    • Battery capacity5000 mAh
    • Weight205 g

    Frequently Asked Questions

    A146PZHSADXK3 is Android 14 firmware for Samsung Galaxy A14 5G, released for Hong Kong SAR China (TGY), Taiwan (BRI). It includes the 2024-12-01 security patch. Samsung built it on 2024-12-30.

    SMR Dec-2024 fixes 34 vulnerabilities, 2 of them critical. Android Security Bulletin: 26, Samsung Semiconductor: 2, Samsung-specific issues (SVE): 6.

    No. A newer build for SM-A146P is available: A146PXXULEZJ3. Install it instead of A146PZHSADXK3 unless you need this exact version. The previous build was A146PXXUADXK2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 4.987 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A14 5G must be on bootloader binary A (10) or lower.

    This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy A14 5G running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A14 5G

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 9 older builds

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Circle to Search
    Circle to Search with Google lets you easily learn more about anything shown on your screen without switching apps. Just touch and hold the Home button or navigation handle, then circle anything on the screen to start a Google search.
    • Press and hold the Side button to access Google Gemini
    The Side button is a new way to access Google Gemini or other digital assistant app quickly instead of using the corner swipe. You can change what the Side button does in Settings.
    • Stabil...

    Model firmware by region